Samsung RS50 series User Manual page 33

Installation
Reattaching the Water Supply Line
1. Insert the water line
2.The Water Line must be fully Inserted to the center of transparent coupler to
prevent water leakage from the dispenser.
3.Insert the clip in the install pack and check that it holds the line firmly.
Reattaching the Front Leg Cover
NOTE
• Before attaching the cover, check water connector for leakage.
• Replace the front leg cover by turning the three screws clockwise, as shown in the figure.
into the coupler
1
2
1
.
2
Center of transparent
coupler
clip A (1/4")
(6.35mm)
Front Leg Cover
Screw
English 33