Weider WESY74090 User Manual page 13

23. Wrap the Long Cable (23) around a 3 1/2" Pulley (15)
in the direction shown.
Attach the 3 1/2" Pulley (15) and a Cable Trap (66) to
the to the lower hole in the "I"-Plates (20) with a 3/8"
x 2" Bolt (12) and a 3/8" Nylon Locknut (21). Note:
Make sure the Cable Trap is oriented as shown.
24. Wrap the Long Cable (23) around a 3 1/2" Pulley (15)
in the direction shown.
Attach the 3 1/2" Pulley (15) and a Cable Trap (66) to
the indicated hole in the welded bracket on the Base
(4) with a 3/8" x 2" Bolt (12) and a 3/8" Nylon Locknut
(21). Note: Make sure the Cable Trap is oriented
as shown.
25. Wrap the Long Cable (23) around a 3 1/2" Pulley (15)
in the direction shown.
Attach the 3 1/2" Pulley (15) to the indicated side of
the Pulley Bracket (57) by using the 3/8" x 2 1/2" Bolt
(60) and the 3/8" Nylon Jamnut (22) attached in step
21. Note: Make sure the Pulley Bracket is oriented
exactly as shown and that the Pulley is attached
on the indicated side.
26. Wrap the Long Cable (23) around a 3 1/2" Pulley (15)
in the direction shown.
Attach the 3 1/2" Pulley (15) to the indicated side of
the Upright (42) with a 3/8" x 3" Bolt (72), a 3/8" Flat
Washer (9) and a 3/8" Nylon Jamnut (22). Note:
Make sure the Long Cable is between the Pulley
and the Spacer on the Upright/Base.
23
24
25
15
22
26
13
20
15
12
23
4
15
66
12
23
57
60
23
42
23
15
Spacer
72
21
66
21
22
9