Firmware Renewal Mode - Marantz BD7003 Service Manual

FIRMWARE RENEWAL MODE

1. Turn the power on and remove the disc on the tray. 1. Turn the power on and remove the disc on the tray.
2. To put the BD player into version up mode, press 2. To put the BD player into version up mode, press
[9], [8], [7], [6], and [POP UP MENU/MENU] [9], [8], [7], [6], and [POP UP MENU/MENU]
buttons on the remote control unit in that order. buttons on the remote control unit in that order.
The tray will open automatically. The tray will open automatically.
Fig. a appears on the screen and Fig. b appears Fig. a appears on the screen and Fig. b appears
on the VFD. on the VFD.
" ******* " differs depending on the models.
" ******* " differs depending on the models.
F/W VERSION UP MODE
F/W VERSION UP MODE
Please insert a Disc
Please insert a Disc
for F/W Version Up
for F/W Version Up
Fig. a Version Up Mode Screen
Fig. a Version Up Mode Screen
Fig. b VFD in Version Up Mode Fig. b VFD in Version Up Mode
The BD player can also enter the version up mode The BD player can also enter the version up mode
with the tray open. In this case, Fig. a will be with the tray open. In this case, Fig. a will be
shown on the screen while the tray is open. shown on the screen while the tray is open.
3. Load the disc for version up. 3. Load the disc for version up.
4. The BD player enters the F/W version up mode 4. The BD player enters the F/W version up mode
automatically. Fig. c appears on the screen and automatically. Fig. c appears on the screen and
Fig. d appears on the VFD. If you enter the F/W for Fig. d appears on the VFD. If you enter the F/W for
different models, "Disc Error" will appear on the
different models, "Disc Error" will appear on the
screen, then the tray will open automatically. screen, then the tray will open automatically.
" ******* " differs depending on the models. " ******* " differs depending on the models.
F/W VERSION UP MODE
F/W VERSION UP MODE
1. ALL
1. ALL
Ver. *.***
Ver. : *.**
(*1) Now Loading...
(*1)
Now Loading...
Fig. c Programming Mode Screen (Example)
Fig. c Programming Mode Screen (Example)
Fig. d VFD in Programming Mode (Example)
Fig. d VFD in Programming Mode (Example)
FIRMWARE RENEWAL MODE FIRMWARE RENEWAL MODE
Model No. ******* Ver. *.***
Model No. ******* Ver. *.***
Model No : ******* Ver. : *.***
Model No. ******* Ver. *.***
ADSP 1/2 Ver. : ***/***
************A*.bin
************B*.bin
EXIT : POWER
The appearance shown in (*1) of Fig. c is The appearance shown in (*1) of Fig. c is
described as follows: described as follows:
No. No. Appearance Appearance
1 1 Now Loading... Loading the disc Now Loading... Loading the disc
2 2 Reading... Reading...
Remove the Remove the
3
3
disc Disc
4 4 See FL display See FL Display
Fig. e VFD in Version Up Mode Fig. e VFD in Version Up Mode
5. After programming is finished, the checksum on 5. After programming is finished, the checksum on
the VFD (Fig. f). the VFD (Fig. f).
Fig. f VFD upon Finishing the Programming Mode (Example)
Fig. f VFD upon Finishing the Programming Mode (Example)
At this time, no button is available.
At this time, no button is available.
6. Unplug the AC cord from the AC outlet. Then plug
6. Unplug the AC cord from the AC outlet. Then plug
it again. it again.
7. Turn the power on. 7. Turn the power on.
8. Press [1], [2], [3], [4], and [DISPLAY] buttons on 8. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order. the remote control unit in that order.
Fig. g appears on the screen. Fig. g appears on the screen.
Version Info
Version Info
Model Name
Model Name
Version
Version
Region
Region
EEPROM CLEAR <STOP> EEPROM CLEAR <STOP>
1-7-1
20
1-7-1
State State
Sending files into the Sending files into the
memory. memory.
After reading, automatically After reading, automatically
the tray opens. the tray opens.
Reading has finished. Reading has finished.
Remove the disc and close Remove the disc and close
the tray.
the tray.
Writing new version data, Writing new version data,
the progress will be displayed the progress will be displayed
as shown in Fig. e. as shown in Fig. e.
" ******* " differ depending on the models.
" ******* " differ depending on the models.
: *******
: *******
: *.***
: *.***
: *-*
: *-*
EXIT <POWER> EXIT <POWER>
Fig. g
Fig. g
E5H70FW
E5J70FW