How To Initialize The Blu-Ray Disc Player - Marantz BD7003 Service Manual

HOW TO INITIALIZE THE BLU-RAY DISC PLAYER

HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
To put the program back at the factory-default, To put the program back at the factory-default,
initialize the BD player as the following procedure. initialize the BD player as the following procedure.
1. Turn the power on. 1. Turn the power on.
2. Remove the disc on the tray and close the tray. 2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [DISPLAY] buttons on 3. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order. the remote control unit in that order.
Fig. a appears on the screen. Fig. a appears on the screen.
" ******* " differ depending on the models. " ******* " differ depending on the models.
Version Info Version Info
Model Name Model Name : ******* : *******
Version Version : *.*** : *.***
Region Region : *-* : *-*
EEPROM CLEAR <STOP> EEPROM CLEAR <STOP>
4. Press [STOP] button on the remote control unit. 4. Press [STOP] button on the remote control unit.
Fig. b appears on the screen and Fig. c appears Fig. b appears on the screen and Fig. c appears
on the VFD. on the VFD.
" ******* " differ depending on the models. " ******* " differ depending on the models.
Version Info Version Info
Model Name Model Name : ******* : *******
Version Version : *.*** : *.***
Region Region : *-* : *-*
EEPROM CLEAR : OK
EEPROM CLEAR : OK
EEPROM CLEAR <STOP> EEPROM CLEAR <STOP>
5. To exit this mode, press [POWER OFF] button. 5. To exit this mode, press [POWER OFF] button.
EXIT <POWER> EXIT <POWER>
Fig. a
Fig. a
EXIT <POWER> EXIT <POWER>
Fig. b Fig. b
Fig. c Fig. c
1-6-1
16
1-6-1
E5H70INT
E5J70INT