Cobra Marine MR F45-D Owner's Manual page 26

Digital Select Calling (DSC)
Operation
Operating Your Radio
Receiving An All Ships Call
All Ships calls sent by stations within range of your radio will sound
the distress alarm on your radio and switch your radio to Channel 16.
When An All Ships Call Is Heard:
All Ships Call
1. Press any button to turn Off the alarm and return to
Standby mode.
2. Read and write down the MMSI of the vessel sending
the call as well as the date and time of the call.
3. Listen to the voice message sent on the channel your
radio was switched to by the incoming all ships call.
Some All Ships calls have channel information.
Sending A Geographical Call
Your radio cannot send Geographical calls. Only large ships and shore
stations with specially equipped radios can send Geographical calls.
Receiving A Geographical Call
Geographical calls are sent by specially equipped radios to all stations in a
particular geographical area to alert only those stations of the call and not
stations in unaffected areas. If you are in an area to which a Geographical
call is made, the radio will sound the geographical alarm and switch to the channel
chosen by the transmitting station.
When A Geographical Call Sounds:
Geographical Call
1. Press any button to turn Off the alarm.
2. Read and write down the MMSI of the vessel
sending the call as well as the date and time
of the call in case you will want to respond.
3. Listen to the voice message sent on the channel your
radio was switched to by the incoming Geographical call.
4. Press one (1) of the following three (3) buttons to
switch from geographical call receive to Standby mode:
Call/Set button or Channel 16/9 button.
48 English
Digital Select Calling (DSC)
Operation
Operating Your Radio
Sending An Individual Call
The DSC Individual call feature allows you to notify one (1), and only one (1),
station that you want to communicate with that station. The DSC Individual call does
not alert all other stations within range.
To Send An Individual Call:
Standby Mode
1. In Standby mode, select a channel on which you
want to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to
Individual
4. Press the Call/Set button to move to the individual directory.
5. Use the Up/Down buttons to select the name you
want to call from the directory.
6. Press the Call/Set button to send the message or
return to Standby mode if
Select Name
If the radio you are calling sends back an automatic DSC
response of "able to comply," the individual alarm will sound.
Wait for a voice message from the called station.
If the called radio does not send an "able to comply"
response, your radio will wait eight (8) seconds and
Individual Waiting
resend the message.
If an "unable to comply" response or no reply is received,
your radio will go to the Unavailable menu.
At the Unavailable menu, you can choose
Send/Exit with the Up/Down buttons. If you choose
EXIT
your radio will restart the individual call. If you choose
, you will be returned to the individual location
EXIT
on the Call Send menu.
.
INDIVIDUAL
was chosen.
EXIT
or
SEND
,
SEND
49
Nothing Comes Close to a Cobra
®