Subscribe to Our Youtube Channel
Related Manuals for Brightlink PRO-MIX BL-8X8-HDBT
Summary of Contents for Brightlink PRO-MIX BL-8X8-HDBT
- Page 1 BRIGHTLINK PRO-MIX 70m 8x8 / 8x16 HDBaseT Matrix Set c/w 8 receivers. Support POC/POE, IP Control, RS232 Control and 8 mirrored HDMI output. Model: BL-8X8-HDBT Operating Instructions BRIGHTLINKAV.COM...
- Page 2 Operating Instruction Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
-
Page 3: Table Of Contents
Operating Instruction Table of Contents 1. Features..................4 2. Package Contents..............4 3. Specifications................4 4. Panel Descriptions..............5 ...........6 4.1 Input / output channel key operation ............6 4.2 Video switching operation ............6 4.3 COPY EDID of HDMI Display ..........7 4.4 COPY EDID of HDBaseT output ............7 4.5 Inlay(built-in) A selection ............8... -
Page 4: Features
Operating Instruction Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1. Features Incorporates HDBaseT technology ... -
Page 5: Panel Descriptions
Operating Instruction 4. Panel Descriptions ① Input button IN1~8: choose the desired input port from ports 1~8 in video mode. ② Output button OUT1~8: choose the desired output port from ports 1~8 in video mode. ③ F1 button: Function button (please refer to 4.1). ④... -
Page 6: Input / Output Channel Key Operation
Operating Instruction 4.1 Input / output channel key operation Channel Button method Any Key The first operation of the button can wake up the screen Input8 In EDID mode, long press means select all the channels Output8 In Video mode, long press means select all the output channels Long press: enter the function selection mode short press: check the status of mode Short press: confirm... -
Page 7: Copy Edid Of Hdbaset Output
Operating Instruction ③ Copy output EDID to the input Operation format: "input channel" + "output channel" + "OK". 4.4 COPY EDID of HDBaseT output Specific operations are as follows ① Long press the F1 key, select input 3 (HDBT EDID copy), press the "OK" key, enter the copy EDID mode. -
Page 8: Inlay(Built-In) B Selection
Operating Instruction ② Select built-in EDID to the input Operation format: "input channel" + "output channel" + "OK". 4.6 Inlay(built-in) B selection The built-in EDID B includes 8 options as follows: OUT1 1080P-2D-2.0 OUT2 1080P-2D-5.1 OUT3 1080P-2D-7.1 OUT4 1080P-3D-2.0 INLAY B OUT5 1080P-3D-5.1 OUT6... -
Page 9: Timing Shutdown Function
Operating Instruction Specific operations are as follows ① Long press the F1 key, select input 6 (baud rate settings), press the "OK" key, enter the baud rate setting mode. Baud rate setting (picture 6) ② Select baud rate to the corresponding output channel and press “OK” to confirm. 4.8 Timing shutdown Function Timing shutdown setting includes eight options as follows: Corresponding output port... -
Page 10: System Settings
Operating Instruction 4.9 System Settings System setting includes two options as follows: Corresponding outlet Setting details OUT-1 Reboot OUT-2 Factory reset The specific operations are as follows: ① Long press button “F1 ”and select input 8 (system Settings) ,press "OK" ,enter the system settings mode . -
Page 11: Boot/Standby Interface
Operating Instruction EDID channel nouns explanation : Inlay A User (built-in EDID A) Inlay B User (built-in EDID B) Far-end Far end (HDBT) Loop out （HDMI） Ring-out The specific operations are as follows: ① In video switch mode, input/output EDID mode , short press “F1 ” to check the current output status. -
Page 12: Application Diagrams
Operating Instruction 6. Application Diagram Remote Control Description ① Standby Mode. ② Lock or Unlock the Panel Button. ③ Choose output from 1-8. ④ PTP button: Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc) ⑤... -
Page 13: Ir System
Operating Instruction 8. IR system The matrix can pass the IR signal through the IR system to the HDMI source or pass the IR signal from the HDMI source to the HDMI sink 1) Control the sources at the sinks side Step1: Connect 8pcs “IR Out”... -
Page 14: Rs232 Control
Operating Instruction 9. RS232 Control 9.1 Software Control (PC tool) Connect the 8X8 HDBaseT Matrix to PC with a RS232 cable, open the software included in the CD Manual. Select the correct port which is connected with PC set the COM port as below, click Connect to get connected. - Page 15 Operating Instruction EDID config Inferface(picture 14) Audio Switch interface(picture 15) IP config interface(picture 16)
-
Page 16: Command Control
Operating Instruction 9.2 Command Control Open the Control Software. We usd “SSCOM32” as an example. Step1: Double click the software to install the RS232 control software in the PC. Setup Icon Step2: Enter the interface as below: Picture-PC port control interface(picture 17) Then we can send commands to control the matrix. -
Page 17: Web Control
Operating Instruction 10. Web Control The default IP Address of the Matrix 192.168.1.88, Mask: 255.255.255.0, GW: 192.168.1.1, DNS: 114.114.114.114. 10.1 Change the IP address of your PC. 1). Connect the Ethernet port of matrix to the Ethernet port on PC by a crossover cable with RJ45 connectors. -
Page 18: Enter Web And Control
Operating Instruction 4). Click the Highlight Internet Protocol Version 4 (TCP/IPv4). 5). Click Properties. 6). Select Use the following IP Address for static IP addressing and fill in the details. For TCP/IP you can use any IP address in the range 192.168.1.1 to 192.168.1.255 (excluding 192.168.1.88). - Page 19 Operating Instruction EDID Setting(picture 21) IP Setting(picture 22) EDID Switch(picture 23) Note: Click mouse once, green, mean HDMI EDID copy Click muse twice, black, mean HDBaseT EDID copy SET1-8-----Green: Inlay A, Black: Inlay B...
-
Page 20: Audio Introduction
Operating Instruction 11. Audio Introduction The HDBaseT Matrix supports HDMI Audio , Analog and SPDIF Audio Embedded, Analog and SPDIF Audio Extraction . 1) HDMI Audio: Support PCM 7.1, Dolby , DTS Audio 2) Analog Audio embedded (under 4K@60HZ 4:2:0) 3) SPDIF Audio embedded ( under 1080P@60HZ) Choose the Audio by PC Tool or sending commands. -
Page 21: Warranty Policy
Operating Instruction MAINTENANCE Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit. PRODUCT SERVICE （1）Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged; (b) Objects or liquids have gotten into the unit;... - Page 22 Operating Instruction installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributable to acts of God. 2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE".
Need help?
Do you have a question about the PRO-MIX BL-8X8-HDBT and is the answer not in the manual?
Questions and answers