Related Manuals for Brightlink BL0808-HDBT-1
Summary of Contents for Brightlink BL0808-HDBT-1
- Page 1 BL0808-HDBT-1 User manual BL0808-HDBT-1 User Manual Brightlink Cables LLC Contact: support@brightlinkcables.com 1...
- Page 2 7. Do not substitute or use any other Power Supply other than the enclosed unit, or a Brightlink approved Replacement Part. Doing so will void the warranty and potentially expose the user to dangerous voltages resulting in an electrical shock.
-
Page 3: Table Of Contents
BL0808-HDBT-1 User manual Table of Contents Introduction.....................4 Features......................4 Panel Description.....................5 Remote Control Description....................8 Connection Diagram....................9 IR Connection....................10 Specifications..................11 Pack age Contents................11 RS-232 Pin Assignment....................12 10. GUI Contr ol..................12 11. Maintenance..................22 12. W arrant y Polic y................. 22 13. -
Page 4: Introduction
BL0808-HDBT-1 User manual Introduction This 8x8 HDBaseT Matrix SET over single Cat6 cable and HDMI can route Eight Hi-Definition sources to any Eight HDTV displays, supporting 1080p Full HD up to 4Kx2K plus all 3D formats, along with multichannel digital audio formats such as Dolby® True HD and DTS-HD®... -
Page 5: Panel Description
Front Panel 1. LCD display---Show the status of input-output selection, EDID info and so on. 2. IR receiver window----Receive the IR from the remote control of BL0808-HDBT-1. 3. Power LED indicator---Indicates the status of the power for the matrix. 4. Power button---Press to power on/off the matrix. - Page 6 BL0808-HDBT-1 User manual OUT4 OUT4=Copy OUTPUT4 EDID to INPUTx OUT5 OUT5=Copy OUTPUT5 EDID to INPUTx OUT6 OUT6=Copy OUTPUT6 EDID to INPUTx OUT7 OUT7=Copy OUTPUT7 EDID to INPUTx OUT8 OUT8=Copy OUTPUT8 EDID to INPUTx 8. Up selection button--- Press to change segment’s value.
- Page 7 BL0808-HDBT-1 User manual 6. DIP switch for EDID---1080i/2.0,1080p 3D/2.0,1080p/2.0,1080p/5.1,1080p/7.1, Copy and Use EDID from Display DIP ON（Down）/OFF（UP） Switching Positions EDID Type 1080p 3D/2.0 1080p/2.0 1080i/2.0 1080p/5.1 1080p/7.1 Copy sink EDID 7. POE power port---Use included 24V/6.25A DC adaptor to power the remote receivers.
-
Page 8: Remote Control Description
BL0808-HDBT-1 User manual Remote Control Description Output and Input select A. OUTPUT-X select INPUT-Y: 1. Press OUTPUT-X (X means 1 to 8 of outputs)Press INPUT-Y ( Y means 1 to 8 of inputs ) 2. Press OUTPUT-X (X means 1 to 8 of outputs) press the left and right arrow buttons to select the input. -
Page 9: Connection Diagram
BL0808-HDBT-1 User manual Connection Diagram Brightlink Cables LLC Contact: support@brightlinkcables.com 9... -
Page 10: Ir Connection
BL0808-HDBT-1 User manual IR Connection Diagram IR Connection Setup • The IR-TX cables which are connected to the 3.5mm IR input ports numbered 1-8 must matchup to the corresponding HDMI input ports numbered 1-8 and their connected source’s IR. IR output #1 TX cable must be connected to, or in the line of site (within 12”), of the IR of the source that is connected to HDMI input #1. -
Page 11: Specifications
BL0808-HDBT-1 User manual Specifications Bandwidth 2.97Gbps per color Video Input Connectors 8 x HDMI Type A, 19-PIN, Female Video Output Connectors 8 x RJ45, Female RS232 Serial port DB-9, Female TCP/IP Port RJ45, Female IR Input Ports 9 x 3.5mm Stereo Jack IR Output Ports 8 x 3.5mm Stereo Jack... -
Page 12: Rs-232 Pin Assignment
BL0808-HDBT-1 User manual RS-232 Pin Assignment Remote Control MT0808-VL2 Console Assignment Assignment Baud Rate: 57600 bps Data Bit: 8-bit Parity: None Stop Bit: 1-bit Flow Control: None GUI Control PC System: Microsoft Windows Operation System Installation 8x8 HDMI Matrix controller is a green software. You just need to copy “8x8 HDMI Matrix Controller vx.x.exe”... - Page 13 BL0808-HDBT-1 User manual How to control Matrix Common information Click to select tab page ① COM port or TCP connect status ② Control command process status ③ Prompt message display area ④ Date and Time display “General” page ① Select control mode: RS232 COM mode (Auto COM ports detected) or TCP mode ②...
- Page 14 BL0808-HDBT-1 User manual automatically before control commands sending ) ⑦ Click to refresh device status: include device information displayed in ⑨ area and Input/output port connection status in ⑩ area. NOTE: Tab pages cannot be changed during control command is processing.
- Page 15 BL0808-HDBT-1 User manual “Port Tag” page ① Input port tags ② Click to edit Input port tags ③ Output port tags ④ Click to edit Output port tags NOTE: Edit boxes are read only, click “Edit” button to pop up window to edit the tags.
- Page 16 BL0808-HDBT-1 User manual Define tags for respective Input port, then devices connect the Input ports can be easily remembered. Click buttons with “×” caption to delete tag which is no use any more, if tag is still used by any other Input port, delete action will be discarded.
- Page 17 BL0808-HDBT-1 User manual ① LED which displays Input number for respective Output port ② Click to select Input port for respective Output port ③ Click to select previous or next Input port for respective Output port ④ Display Output from Input with tag information when mouse moves over ② buttons ⑤...
- Page 18 BL0808-HDBT-1 User manual Pop-up Menu When mouse moves over ② setting buttons, and click mouse right button, menu will pop up like All Outputs: All Outputs from same Input “1 Output” to “7 Outputs”: Set current Output (where mouse right clicked) and the next x-1 ( x...
- Page 19 BL0808-HDBT-1 User manual Port to Port: Output1 from Input1, Output2 from Input2, Output3 from Input3, etc. Edit selected pre-setting item After action of ⑥ , edit form will pop-up as below: ① Pre-Setting name ② Set all Output ports from same Input ③...
- Page 20 BL0808-HDBT-1 User manual ① Set EDID mode for selected Input port or All Input ports, click “Set” button to complete action. NOTE: When set User1/User2 EDID mode, should Download EDID content to User1 Memory/User2 Memory first. User1/User2 default EDID content is 1080p, Stereo Audio 2.0.
- Page 21 BL0808-HDBT-1 User manual ① Click to open firmware file (file extension is “.fw”). ② Firmware upgrade progress ③ Click the button to upgrade firmware. NOTE: If failure occurs during upgrading firmware process, the following steps SHOULD be done sequentially to establish next upgrading procedure:...
-
Page 22: Maintenance
The warranty does not apply to any part of a product that has been installed, altered, repaired, or misused in any way that, in the opinion of Brightlink, would affect the reliability or detracts from the performance of any part of the product, or is damaged as the result of use in a way or with equipment that had not been previously approved by Brightlink. -
Page 23: Exclusive Remedies
When returning product to Brightlink for any reason, the customer should fill out the official RMA form to obtain a RMA number. Without the permission or approval, Brightlink will be no responsible for any return.This can be initiated by emailing or calling your related sales. - Page 24 Shipping your RMA to Brightlink using regular mailing envelopes is not acceptable, as they do not protect the product from damage during shipping. Brightlink will not repair or replace a module that is shipped in such a way that the product is not properly protected.
Need help?
Do you have a question about the BL0808-HDBT-1 and is the answer not in the manual?
Questions and answers