Introduction - Seagate Nytro XF1230-1A0240 Product Manual

www.Seagate.com

1. Introduction

The Seagate® Nytro® XF1230 SSDs provide high reliability and sustained performance for enterprise Server and
Storage products. The Nytro XF1230 series offers SATA interface, fully compatible with SATA 3.1 6.0Gb/s.
Table 1 Nytro XF1230 Card Features
Feature
Capacity
Certifications,
Eco-Compliance
Dimension
Endurance
Form
Interface
Compliance
Latency
NAND
Performance
Random
(Sustained)
Performance
Sequential
(128 KB
Sustained)
Power
Consumption
Power Loss Protection
Power
Management
Power On Ready
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. H
 240, 480, 960, 1920 GB
 CE, UL, FCC, RCM, BSMI, KCC, Microsoft WHQL, SATA-IO
China RoHS2, Taiwan RoHS

 (69.85±0.25) x (100±0.25) x (Max. 7) mm
 1 Drive Write Per Day (DWPD) for higher lifetime endurance. See
2.5 Inch Standard SSD

Fully compliant with SATA revision 3.1, compatible with SATA 6.0Gb/s interface rates.

 Fully compliant with ATA-8/ACS-3 Standard.
 PIO, DMA, UDMA (up to 6, dependent on host) supported.
 SATA 6.0Gb/s Native Command Queuing (NCQ): up to 32 commands.
 SMART command transport (SCT) technology.
Data Set Management Command Trim support.

Read: 140 μs (Typ.)

 Write: 60 μs (Typ.)
 16 nm
4 KB Read: Up to 98K IOPS

 4 KB Write: Up to 16.8K IOPS
8 KB Read: Up to 58K IOPS

8 KB Write: Up to 8K IOPS

 Read: Up to 560MB/s
Write: Up to 505MB/s

5.7
Active: Up to W

Idle: Up to 1.0 W

 2.5 inch: 5 V SATA Supply
OS-aware hot plug/removal

 Normal shut down: 5 s
 Unsolicited shut down: 21 s
Description
SSD Outer case can support suitable Z-height
for various host situations.
Table 10, Endurance, on
Latency measured with transfer size 4 KB and
queue depth of 1 on a random workload, and
based on high density (1920 GB).
Actual performance may vary depending on
use conditions and environment.
See Section 2.2, Performance, on page
Typical I/O performance numbers measured
with a queue depth of 32, write cache enabled,
6Gb/s SAS chipset port, and the Intel RST driver.
Actual performance may vary depending on
use conditions and environment.
See Section 2.2, Performance, on page
Typical I/O performance numbers as measured
with a queue depth of 32, write cache enabled,
6Gb/s SAS chipset port, and the Intel RST driver.
See Section 2.3, Power, on page
RMS Average.
NOTE This specification is for the 1920 GB drive;
smaller capacity drives have lower active
power.
Based on High Density (1920 GB).
Introduction
page 10.
8.
8.
9.
6