Leg Operation - Prime Design Baselight 420X User Manual

LEG OPERATION

Baselight have three support legs that can be individually adjusted to compensate for uneven
terrain. The goal for the operator is to ensure that Baselight chassi always stand straight (level)
BEFORE rising the mast.
How to secure legs before rising chassi
When the locking lever is in its top position the self locking mechanism is
engaged. Baselight will now self lock when chassi is raised. The operator
must determine if Baselight chassi is standing straight (level) after being
raised from ground and adjust if necessary. Failure to check horizontal
level can lead to more friction when raising mast. Picture shows locking
lever in locked position (lever up)
How to unsecure legs before lowering chassi
Always make sure that Baselight armature is stoved inside the chassi before pro-
ceeding with this step!
Release the locking lever by bringing it to the down position on all three legs.
The self locking mechanism is now deactivated and the Baselight chassi can now
be raised from the ground a few centimetres and the locking clamps will now
leave the locking slots. It is now possible to lower the chassi to the ground. Pic-
ture shows locking lever in unlocked position (lever down).
CAUTION! Never try to adjust leg angels after the mast is extended.
Always lower the mast before making adjustments.
The leg adjustment mechanism contains three parts:
1 Locking slot
2 Locking clamp
3 Locking lever
Locked
Unlocked
PAGE 6