Download Print this page

Table Of Contents - Prime Design Baselight 420X User Manual

Advertisement

Table of contents

Read this carefully before operation to avoid
personal injury or void warranty.
Baselight 420X is a mobile lighting equipment intended for temporary illumination where high
lumen output in combination with low weight and minimal power consumption is required.
Baselight is designed to protect the operator as much as possible and all important safety func-
tions are in red color. It is however a requirement that the operator understand the limitations
of this equipment by reading this manual.
Never cover the armature when switched on.
Deploy the legs and secure their locking before the armature and mast is raised.
Never switch on power before armature is outside the chassi.
Make sure that Baselight is properly secured to the ground.
Make sure that Baselight stands level on ground before the mast is raised.
Make sure that Baselight is secured to the ground on slippery surfaces (snow, mud etc).
Never try to adjust the leg angle when the mast is raised.
Never use high pressure water to clean/rinse Baselight. Use garden hose pressure only.
Always use electrical connections with protective earth and ground fault switch.
Never try to open electrical junction boxes. Dangerous voltage inside!
Never hold out the red locking handles when raising the mast.
Never use chemical substances to clean Baselight.
Never put any extra weight/equipment on mast or armature.
Make sure each section locks (click sound) when raising mast.
Never drop the mast onto lock bellow. Slide downwards gently.
The light source in this product is based on light emitting diodes (LED). Avoid looking into the light
source as this may affect your eyesight.
4
5
6
7
8
9
10
PAGE 3

Hide quick links:

Advertisement

loading