Custom-Antenna Gain; Distance - HPE FlexNetwork MSR Series Command Reference Manual

Examples
# Set the maximum number of clients that can associate with the AP to 38.
<Sysname> system-view
[Sysname] interface wlan-radio 0/0
[Sysname-WLAN-Radio0/0] client max-count 38

custom-antenna gain

Use custom-antenna gain to set the antenna gain.
Use undo custom-antenna gain to restore the default.
Syntax
custom-antenna gain antenna-gain
undo custom-antenna gain
Default
The antenna gain is 0 dBi.
Views
Radio interface view
Predefined user roles
network-admin
Parameters
antenna-gain: Specifies the antenna gain in the range of 0 to 20 dBi.
Usage guidelines
This command is applicable only when an AP uses a third-party antenna.
Effective Isotropic Radiated Power (EIRP) is the actual transmit power of an antenna, and it is the
sum of the antenna gain and the maximum transmit power of the radio. If the configured antenna
gain causes the EIRP to exceed the threshold, the antenna gain configuration fails.
Make sure the antenna gain setting is the same as the gain of the antenna used on the AP.
Changing the radio mode automatically changes the antenna gain.
Examples
# Set the antenna gain to 2 dBi.
<Sysname> system-view
[Sysname] interface wlan-radio 0/0
[Sysname-WLAN-Radio0/0] type dot11an
[Sysname-WLAN-Radio0/0] custom-antenna gain 2

distance

Use distance to set the maximum transmission distance.
Use undo distance to restore the default.
Syntax
distance distance
undo distance
7