Page 2
PICtail, PIC logo, REAL ICE, rfLAB, Select Mode, Total intellectual property rights. Endurance, TSHARC, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.
• Customer Support • Document Revision History DOCUMENT LAYOUT This document describes how to use the MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board. The manual layout is as follows: • Chapter 1. “Product Overview” – Important information about the MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board.
(void) user { ... RECOMMENDED READING This user's guide describes how to use MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board. The following Microchip document is recommended as supplemental reference resources. MCP73213 Data Sheet, “Dual-Cell Li-Ion / Li-Polymer Battery Charge Management Controller with Input Overvoltage Protection”, DS22190...
Li-Ion battery protection circuit. This chapter provides an overview of the MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board and covers the following topics: • “What is the MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board?”...
Refer to Table 2-2 for Charge Status Outputs and Table 2-1 for Fast Charge Current vs. Resistor Lookup Table. The MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board comes with an installed MCP73213 device in the 3 mm x 3 mm DFN package. The factory preset battery regulation voltage is 8.40V with 10% precondition current, 10% termination...
Typical applications for the reference design are Digital Camcorders, Portable Media Players, Handheld Medical devices, Portable Communicators, Ultra Mobile Computers and Netbook computers. FEATURES The MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board has the following features: • 13V Input Overvoltage Protection • 10% Preconditioning of deeply depleted cells.
MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board User’s Guide GETTING STARTED The MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board is fully assembled and tested for charging a single-cell Li-Ion or Li-Polymer battery. 2.3.1 Power Input and Output Connection 2.3.1.1...
BATTERY CHARGER EVALUATION BOARD USER’S GUIDE Appendix A. Schematic and Layouts INTRODUCTION This appendix contains the following schematics and layouts for the MCP73213 OVP Dual-Cell Li-Ion Battery Charger Evaluation Board: • Board – Schematic • Board – Top Layer • Board – Top Metal Layer •...
MCP73213 OVP DUAL-CELL LI-ION BATTERY CHARGER EVALUATION BOARD USER’S GUIDE Appendix B. Bill Of Materials (BOM) TABLE B-1: BILL OF MATERIALS Reference Description Manufacturer Part Number Bump BUMPON HEMISPHERE .44X.20 SJ5003-9-ND WHITE C1, C2 CAP CERAMIC 4.7 µF 25V X5R 1206...
Need help?
Do you have a question about the MCP73213 OVP and is the answer not in the manual?
Questions and answers