Advertisement
Front Panel
1
Subwoofer Connection
The buttons are located on the rear.
Place the wireless subwoofer near the sound bar and
follow steps below.
a
Connect the power cord of wireless subwoofer
and sound bar to the outlet.
b
Turn on the main unit :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Standby
green LED turns on.
Subwoofer Connection Manually
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Selects Function.
If the subwoofer does not playback audio, try to
/
· · · · · · · · · · · · · · · · · · · · · · · · ·
Adjusts Volume.
connect manually.
a
Press Pairing button on the rear of the wireless
Rear Panel
subwoofer.
y The green LED on the rear of wireless
subwoofer blinks quickly.
b
Turn on the main unit.
c
Pairing is completed.
y The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
(USB)
· · · · · · · · · · · · · · ·
Connect to a USB device.
from the device (ex. wireless router, microwave
PORT. IN (Portable)
· · ·
Connect to a Portable device.
oven, etc.) over 1 m (3 feet) to prevent
wireless interference.
OPT. IN (Optical)
· · · · · ·
Connect to an Optical device.
SJ2.AUSALLK_SIMPLE_ENG_MFL70040411.indd 5-8
2
TV Connection
Remote control
a
Connect the sound bar to the TV using
an Optical cable.
b
Set up [External Speaker (Optical)] on
your TV setting menu.
TV
STANDARD/BASS BLAST:
Selects the sound effect.
DRC ON/OFF :
Dynamic Range Control optimizes the volume
Additional Device Connection
level of compatible Dolby Digital content.
a
Connect to the external device as follows.
WOOFER LEVEL +/-:
Adjusts the volume level of
subwoofer.
Automatically turns on by an
AUTO POWER ON/OFF:
(Set-top
input source.
Box, Player
etc.)
Replacement of battery
TV
b
Set the input source by pressing OPTICAL on
the remote control or pressing F on the unit
repeatedly.
Additional Information
Specification
Refer to the main label.
Power requirements
Power
Refer to the main label.
consumption
Approx.
Dimensions
660 mm x 56 mm x 99 mm
(W x H x D)
(26 inch x 2.2 inch x 3.9 inch)
With foot
Bus Power Supply
5 V 0 500 mA
(USB)
Amplifier
(Total RMS
160 W RMS
Output power)
Design and specifications are subject to change without
notice.
2017-04-25
4:59:13
Advertisement
