Ford Escape 2010 Workshop Manual page 47

Item Part Number
1 20205 LH/ 20204
RH
2 20125 LH/ 20124
RH
WARNING: Collision damage repair must conform to the instructions contained in this workshop
manual. Replacement components must be new, genuine Ford Motor Company parts. Recycled, salvaged,
aftermarket or reconditioned parts (including body parts, wheels or safety restraint components) are not
authorized by Ford.
Departure from the instructions provided in this manual, including alternate repair methods or the use of
substitute components, risks compromising crash safety. Failure to follow these instructions may adversely
affect structural integrity and crash safety performance, which could result in serious personal injury to
vehicle occupants in a crash.
1. NOTE: Inspect the door hinges prior to panel replacement. Repair or rebuild as necessary.
Remove the door window glass. For additional information, refer to
2. Remove the door. For additional information, refer to
3. Remove the door latch. For additional information, refer to
4. Remove the outer door handle and lock cylinder. For additional information, refer to
5. Remove the door window glass weather stripping.
6. Remove the side view mirror. For additional information, refer to
7. Remove the door outer trim.
8. NOTICE: Drill though outer panel sheet metal only to avoid damage to the door assembly.
Description
Door outer panel — Bake Hardened Steel (BH) 210
steel
Door assembly — mild and High-Strength Low Alloy
(HSLA) 350 steel
Section 501-11
Section 501-03 .
Section 501-14 .
Section 501-09
.
Section 501-14 .
.