Table of Contents
Advertisement
F
GENERAL INFORMATION
The following instructions will help you to mount your trencher on your skid
steer. The trencher uses the skid steer's quick-change attaching system for ease
on installation. Therefore, if you know how to attach the skid steer loader bucket,
attaching the trencher should prove no problem.
You must install the mounting kit prior to installing the trencher. If you have
not installed the mounting kit, turn to Section E and do it now. Remember to read all
safety warnings, decals, and operating instructions before operating the skid steer
or trencher.
MOUNTING INSTRUCTIONS
1.
If you haven't done so already, remove the steel shipping banding from
around the trencher and skid.
2.
Set the quick-change attaching lock on the skid steer toolbar to the unlocked
position. Lower the skid steer loader arms and tilt the toolbar down low
enough to pass under the top lip of the mounting kit adaptor plate.
3.
Following all standard safety practices, start the skid steer and slowly drive it
in back of the trencher. Position the skid steer so that the top of the toolbar
is in under the lip on the adaptor plate. (See Figure #1)
FIGURE #1
DRIVE FORWARD
TRENCHER INSTALLATION
617 TRENCHER
SKID STEER
ADAPTOR PLATE
TOOLBAR
TRENCHER
2-21-92
F
5780
Hide quick links:
Advertisement
Table of Contents
