Pioneer DVR-560H-S Service Manual page 87

5
[Operation procedure]
1. When you enter the Drive Adjustment Mode, the following screen is displayed. On this screen, you can check
11-digit numeric data stored in FLASH of MAIN Assy, and can also switch over between each mode.
[Drive Adjustment Mode]
PU DATA
[12345678910]
<CLEAR> Exit
<STEREO> PU Data Setting
<SEARCH> Power Adjustment
2. To enter the PU Data Setting Mode, press [STEREO] on the remote control unit for service.
Entering the PU Data Setting Mode displays the following screen.
[PU Data Setting Mode]
OLD PU DATA
[12345678910]
NEW PU DATA?
>***********
<CLEAR> Exit
<SEARCH> PU DATA CLEAR
3. By pressing [0] to [9] keys on the remote control unit for service, enter an 11-digit number marked on
the case of a loader provided in pairs with PU.
Entering the 11-digit number displays the following screen.
[PU Data Setting Mode]
OLD PU DATA
[12345678910]
NEW PU DATA?
>01987654321 OK
<CLEAR> Exit
<SEARCH> PU DATA CLEAR
<PLAY> Enter
4. To enter the 11-digit number, press [PLAY] on the remote control unit for service.
The 11-digit number contains 2-digit checksum data to prevent input errors.
The screens displayed for the correct/incorrect check sum are as follows.
When the checksum is correct
[Drive Adjustment Mode]
PU DATA
[01987654321]
<CLEAR> Exit
<STEREO> PU Data Setting
<SEARCH> Power Adjustment
When the checksum is incorrect
[Drive Adjustment Mode]
PU DATA
[12345678910]
CHECK SUM NG!
[01987654321]
<CLEAR> Exit
<STEREO> PU Data Setting
<SEARCH> Power Adjustment
5
6
11-digit number
for adjustment
When the checksum is correct
Enter the Power Adjustment Mode and
execute the LD power adjustment, as
described in 5.
When the checksum is incorrect
The input data may be incorrect.
Return to 2 and enter the PU Data Setting
Mode to re-enter the 11-digit number.
DVR-LX61
6
7
7
8
A
B
C
D
E
F
87
8