Notes On Replacement Of The Fl Lens (Dvr-Lx61 Only) - Pioneer DVR-560H-S Service Manual

1

1.4 NOTES ON REPLACEMENT OF THE FL LENS (DVR-LX61 ONLY)

The Panel Frame, FL Lens, and FL Filter are attached to the chassis with two-sided (double-back) tape.
If one of these parts has to be replaced, replace all three parts at the same time.
A To replace the FL Lens, follow the procedures described below:
Procedures for replacement of the FL Lens
1. Lightly attach the FL Lens so that the two projections on the upper side of the panel touch the Panel Frame and that
the clearances between the OPEN/CLOSE key and the cutout for that key on the FL Lens will be the same on the
left and right sides.
2. After confirming that the FL Lens is properly aligned, strongly push the black part of the FL Lens to firmly attach it.
Be careful not to press the OPEN/CLOSE key while attaching the FL Lens.
B
C
D
E
F
10
1
2
OPEN/CLOSE Key
DVR-LX61
2
3
Panel Frame
FL Lens
3
4
4