Remington 494 Operating Instructions Manual page 9

;
;
;
2. Should the tool fail to fire, hold the muzzle firmly against the work surface for 30 seconds.
Release the trigger and remove pressure on the tool while holding the muzzle against the
work surface. Again press the tool firmly against the work surface and pull the trigger. If the
tool still fails to fire, hold the tool firmly against the work surface for another 30 seconds before
unloading and carefully discarding the misfired power load into water or oil.
;
;
;
;
G 018
3. ALWAYS use the spall shield when driving directly into concrete or steel. Always wear
approved goggles.
G 018
482-49
4. NEVER use a powder actuated tool in an explosive or flammable atmosphere or when non-
sparking tools are required.
POWER LOADS AND FASTENERS
G 018
1. NEVER leave unfired power loads on floors or work surfaces.
101437
Safety Precautions
WATER
482-46
;
; ;
;
GAS
GASOLINE
OLINE
482-50
G 018
G 018
9