Features - Bosch 8733951033 Installation & Operation Manual

Installation & Operation Manual

5 Features

The ZS Series Zone Sensors are thermistor-based, communicating temperature
sensors that may optionally sense humidity or CO2 . The ZS Sensors are fi eld
installed and are wired to the Rnet port of the DDC Control Air 5600, 5830, or
6120 controller1. A maximum of 5 ZS sensors may be daisy-chained and used for
applications where averaging of multiple readings for temperature is required.
Sensor
ZS Base
Table 5
Sensor
ZS Slidebar
Table 6
Slide the sensor's potentiometer up to make the zone warmer or down
to make it cooler. The control program determines how much you can
adjust the set point.(see fi gure# 2)
Figure 2
Bosch Thermotechnology Corp. | 02 .2018
Features

Local access port

No user control

Available in:
—
Temperature only: ZS-1 (8733951033)
—
Temperature with Humidity: ZS-1H (8733951034)
Features

Slide potentiometer for temperature setpoint adjustment to make the zone warmer or cooler

button to override the schedule and put the zone in an occupied state

Green LED to indicate occupied state

Local access port

Available in:
—
Temperature only: ZS-1S (8733951035)
Warmer
Cooler
Slide
Bosch ZS Series Zone Sensors R1 | 7
Data subject to change