Care And Maintenance - Ninja BL685 Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Handle the blade assemblies with care,
as the blades are very sharp.
1
Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3 Place the pitcher, Nutri Ninja
Bowl in the dishwasher. Place the lids and blades on
the top rack.
4
Carefully hand wash the lids, pitcher, bowl, Nutri Ninja
cups and blade assemblies in warm, soapy water with a
soft cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
NUTRI NINJA PRO EXTRACTOR BLADES
®
When washing the Pro Extractor Blades
attempt to remove the seal. Removing the seal can
cause damage to the seal which can result in improper
reassembly and leaking.
If the blade seal becomes loose, please call customer
service at 1-877-646-5288.
11 1-877-646-5288
cup and Food Processor
®
OR
, do not
™
HOW TO STORE
1
Store the Ninja
with the pitcher on the motor base, Stacked Blade
Assembly inside the pitcher and the lid locked
on the pitcher. Do not place anything on top. Store
the Food Processor Bowl with the Chopping Blade
assembly inside and the lid on top. Store the Nutri
Ninja cup with the blade assembly attached to the cup
®
and all other attachments along side the appliance or
in a cabinet where they will not be damaged and won't
cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja Professional Kitchen System features a unique
®
safety system which prevents damage to the unit's motor
and drive system should you inadvertently overload your
appliance.If the appliance is being overloaded, the
motor will stop. Allow the appliance to cool for
®
approximately 15 minutes. To reset the appliance, follow
the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assembly.
™
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
Professional Kitchen System upright
®