Assembly And Use For The Nutri Ninja - Ninja BL685 Owner's Manual

Assembly and Use for the Nutri Ninja

WARNING: Never leave the appliance unattended while in use.
CAUTION: Handle the blade assemblies with care, as the blades are very sharp.
CAUTION: DO NOT BLEND HOT LIQUIDS.
IMPORTANT: Make sure that the motor base is plugged in for use
ASSEMBLY
Fig. 1 Fig. 2
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Add ingredients to the Nutri Ninja
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
3
Place the Pro Extractor Blades
it tightly until you have a good seal. (Fig. 1)
4
Turn the Nutri Ninja cup upside down and place it onto
®
the motor base, aligning the tabs on the cup with the
motor base. Turn the Nutri Ninja
it is locked in place. (Fig. 2) Turn the power button on,
the Nutri Ninja button and Pulse will illuminate.
®
5
Press down on the Pulse button in short intervals to
break down tough ingredients. Press the Nutri Ninja
button to activate the 30 second continuous run. (Fig. 3)
The unit will stop after 30 seconds.
7 1-877-646-5288
PULSE
Fig. 3
cup.
®
onto the cup and screw
™
cup clockwise until
®
®
Cup
®
REMOVAL
Fig. 4
6 Once you have reached your desired consistency,
turn the power button off. Turn the Nutri Ninja
counterclockwise and pull straight up to remove.
(Fig. 4) (Fig. 5)
7 Turn the cup upright and remove the Pro Extractor
Blades by twisting the blade assembly counterclockwise.
™
8
Place the Sip & Seal
clockwise to seal and enjoy!
9
Make sure that the motor base is unplugged when not
in use.
10 To release the motor base from
the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you. (Fig. 6)
NOTE: To order additional Nutri Ninja
Cups, please visit our website:
www.ninjakitchen.com or feel free to contact
customer service: 1-877-646-5288.
Fig. 5
®
onto the Nutri Ninja cup, twist
® ®
®
cup
Fig. 6