Installation Preparation - ILVE IVUM90 User Manual

Unpacking
Remove the packaging with the product in place. Cut off the packing ribbons and
carefully cut open the packaging (do not cut too deeply), remove the packaging.
Check that the product is free from transport damage. Any damage shall be reported
immediately to the carrier or seller. Damage, faults and missing parts must be
reported immediately to the seller

Installation preparation

1. The range hood should be mounted at a distance of 650mm – 750mm from the
cooking surface for safety & optimum performance ( If the instructions for
installation of the gas hob specify a greater distance, this has to be taken into
account.)
2. Make sure the inner cabinet size appropriate for installing the range hood.
Fixing to the ceiling cabinet
1. Before mounting the hood, plug in and test all functions for proper operation.
2. Removed the filters from the bottom of the hood to prevent damage during the
installation.
3. Connected duct tube (if included with the range hood) to the top of the range
hood using duct tape on all seals.
4. With assistance, hold the hood temporary in position ensuring the bottom is
above the minimum clearance for the cooking surface. Mark on the cabinet the
holes for the four mounting screws.
5. Drill the holes at the distances indicated.
6. Mount the hood on the cabinet screws and adjust for appropriate position. When
the hood has been adjusted, secure unit by tightening screws.