Controlling The Tv With A Keyboard Or Mouse; Connecting A Usb Keyboard Or Mouse; Connecting A Bluetooth Keyboard Or Mouse - Samsung NU100 series E-Manual

" Anynet+ (HDMI-CEC) works only with external devices that support HDMI-CEC and only when those devices are either in
standby mode or turned on.
" Anynet+ (HDMI-CEC) can control up to 12 compliant external devices (up to 3 of the same type) except for home theatres.
Anynet+ (HDMI-CEC) can control only one home theatre system.
"
To listen to 5.1 channel audio from an external device, connect the device to the TV via an HDMI cable and connect a 5.1
home theatre system directly to the external device's digital audio output connector.
" If an external device has been set up for both Anynet+ and a universal remote control, the device can be controlled only
with the universal remote control.

Controlling the TV with a Keyboard or Mouse

Connecting a keyboard or mouse to make it easier to control the TV.
Settings
You can connect a keyboard or mouse to make it easier to control the TV.

Connecting a USB keyboard or mouse

Plug the keyboard or mouse cable into the USB port.
" If you connect a mouse, it is available only in the

Connecting a Bluetooth keyboard or mouse

Settings
Device List
" This function may not be supported depending on the model or geographical area.
" If your device was not detected, position the keyboard close to the TV, and then select Refresh. The TV scans for available
devices again.
" If you connect a mouse, it is available only in the
General External Device Manager
General External Device Manager
Input Device Manager
Internet app.
Input Device Manager
Internet app.
- 49 -
Try Now
Bluetooth