Teltonika RUT500 Quick Start Manual

Login to device
1. To enter router's Web interface type http://192.168.1.1
2. Use the following parameters when prompted for authentication:
User name: admin
Password: admin01
3. Configuration Wizard will start after logging in. It is necessary to complete Configuration
Wizard to setup router to correct mode. You can leave default settings but it is strongly
recommended that you change the password and enable Wireless Security.
4. Go to Status -> Network Information and pay attention to Signal Strength. To maximize
the performance try adjusting antennas or changing location of your device to achieve
best signal conditions.
This sign on the package means that
it is necessary to read the User's
Manual before you start using the
device.
Please visit our web site www.teltonika.lt
4
in your internet browser.
This sign on the package means
that all used electronic and electric
equipment should not be mixed
with general household waste.
for complete user manual
RUT500
HSPA+ Router
Quick start guide v1.7