Advertisement
Use Hands-free Kit, if available.
If you have those kits make sure it is done pre-programmed numbers where
possible, and keeping calls brief and to a minimum.
If you don't have a Hands-free Kit, pull off the road and park your vehicle before
making or answering a call in driving conditions so require.
Radio Frequency (RF) Exposure and SAR
This phone is designed and manufactured not to exceed limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission
(FCC) of the U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to assure the
safety of all persons, regardless of age or health.
The exposure standard for this phone employs a unit of measurement known as
the Specific absorption Rate, or SAR. The SAR limits set by the FCC are
1.6W/kg. Tests for SAR are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone while operating
can be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station, the lower the
output power. Before a phone model is available for sale to the public in the U.S.
and Canada, it must be tested and certified by the FCC that it does not exceed the
limits established by each government for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on the body) that conform to
a uniform testing methodology determined by an expert standards body and then
reported to the FCC. The highest SAR values for this model phone when tested
for use on the body will 0.363W/kg (GSM 850MHz head), 1.040W/kg (GSM
850MHz
body),
0.570W/kg(GSM
1900MHz
head)
and
0.853W/kg
(GSM1900MHz body).
\
Advertisement
