Download Print this page

Kyocera K2000 User Manual page 19

Advertisement

Inserting Battery
How to insert the battery
a. Align the bottom of the battery with the slot in the bottom of the phone.
b. Then sit the battery on the back of the phone until it clicks into place.
How to remove the battery
a. Turn off your phone first.
b. Push up the battery release latch
c. Slowly lift the battery away from the up.
How to charge the battery
a. Plug your charger in the wall socket.
b. Connect the other end to the interface connector on the bottom of the phone.
c. Battery can be charged if you connect USB cable to your PC from the
phone.
! Note
The phone will automatically check the battery status while the charger
connector is installed on the phone. Once it detects that the battery level
Full status, it automatically recharges the battery.
Normally the phone completes battery charging in one hour.
For a new or completely discharged battery, it takes at least 4 hours of
charging to achieve optimum performance.
You can make calls while charging your phone.
Do not charge the phone without the battery in place.

Advertisement

loading