Advertisement
c
CHARGING OPERATION
Charging example— AD-102 for IC-M1V/M1 EURO V
jg CAUTION
6 The transceiver power MUST be turned
0 OFF during charging otherwise;
6 •The battery will not be charged correctly.
4g• The battery life may be shortened.
^ The transceivercannotbe usedeven when the
%tpower is ON.
AC adapter
(Not supplied with some
versions.)
CHARGE INDICATOR
• Lights orange while charging.
• Lights green when rapid charging is completed?
- Butit is still charging intrickle charge mode whencharging Ni-Cd or Ni-MH batterypack.
• Flashes red when the protection circuit is activated.
- Check the powersource (voltage) or re-connect the powerplug.
- The battery temperature is outside of the charging range. (Ni-MH battery only)
% NOTE for Ni-Cd/Ni-MH battery packs:
^The BC-119N rapidly charges a battery
^ pack to aspecified level, not acompleted
% level,to prevent over-charging. Leave the
% battery pack in the charger for a few more
% hours (up to 15 hours; depending on battery
Sg condition) after the LED indicator turns
%green, to chargethe battery completely.
Use the spacer, if supplied
with the charger adapter, for
charging the battery pack
with/without transceiver.
•3- Recommendation for Li-Ion battery
packs:
Li-Ion batteries are different from Ni-Cd
batteries in that it is not necessary to
completely charge and discharge them
to prolong the battery life. Therefore,
charging the battery in intervals, and not
for extended periods is recommended.
DESKTOP CHARGER ADAPTERS
O PCB type adapters
Transceiver
Charger
Adapter
Battery pack
IC-F10/F20,
IC-M10A/E.
IC-2GX series,
IC-V68/U68
AD-66
BP-157/A,
BP-160/R,
BP-174
IC-F30/F40,
IC-F35/F45
AD-67"
CM-140/141/142*
IC-M15,
IC-GM150O
AD-68
CM-138/139/165
IC-M1,
IC-M1EURO
AD-69
BP-185/186
IC-F3/F4/S,
IC-T2H/A/E,
IC-F4SR/TR
IC-A4, IC-40S
AD-81
BP-195/196/R
IC-4008A/E/M,
IC-4008MKII,
IC-446S, IC-40Jr
AD-89
BP-202
IC-F30G/F40G,
IC-F3Q/F4G,
IC-F11/F21/F12/F22,
IC-V8. IC-T3H
AD-94*
BP-209/210V222
IC-F30G/F40G,
IC-F3G/F4G,
IC-F11/F21/F12/F22,
IC-V8, IC-T3H
ad-iov*
BP-209/210*/211,I
BP-222
IC-M1V,
IC-M1EUROV
AD-102*
BP-215f
O Non-PCB type adapters
(AD-75 or AD-88 is required)
Transceiver
Charger
Adapter
Battery pack
IC-W21/X21,
IC-2GX series
AD-28
+AD-75
BP-131/132/157/A
BP-160/174
IC-A3/A22
AD-50
+AD-75
CM-166
IC-Z1A/E.
IC-W31/W32
AD-51
+AD-75
BP-171/172/173,
BP-180
IC-T22/T42,
IC-T7A/E/H
AD-56
+AD-75
BP-171/172/173,
BP-180
IC-T8, IC-T81,
IC-A5/A23
AD-87
+AD-88*
BP-1987199V200VL*
*AD-67, AD-88, AD-94 and AD-101 have a temperature
detection circuit for the Ni-MH battery. When the bat
tery's temperature is outside the charging range, charg
ing stops and the charging indicator flashes until the
temperature returns to within the range.
•AD-101 and AD-102 are compatible for charging the Li-
Ion battery packs, BP-211 and BP-215, respectively.
The BC-119N may be able to be used with future
transceivers not listed above. See the transceiver
instruction manual for the appropriate adapter in
formation.
SPECIFICATIONS
Charging current
420 mA±10% (rapid charging)
540 mA±10% (rapid charging)
670 mA±10% (rapid charging)
840 mA±10% (rapid charging)
30 mA±10 mA (trickle charging)
Dimensions
: 115(W)xi03(D)x60(H)mm
(proj. not incl.)
4V4(W)x41/i9(D)x2'/4(H) in.
Weight
: 200 g; 7.1 oz
Charging temperature range:
10*Cto 40*C; +50'F to +104T
Power supply requirement:
12 to 20 V DC or the specified
Icom ACadapter (BC-145)
Electrostatic durability:
Airdischarge
8 kV
Contact discharge
4 kV
All stated specifications are subject to changewithout noticeor obligation.
Advertisement
