Page 1
EMSGR33, EMSGR48, EMSGR69 A Step Above the Standard MANUFACTURING A Step Above the Standard 967 Sandhill Ave., Carson, CA 90746 Thank you for selecting an EVEREST product. Tel : 310-323-6586, 800-444-6285 Fax : 310-323-7524 Visit our website at www.EVERESTref.com www.EVERESTref.com...
Safety Notices Safety Notices Safety Notices Safety Notices MANUFACTURING MANUFACTURING WARNING - WARNING - When using your appliance, always follow basic precautions, including Read and follow all safety notices in this installation guide. the following : These notices provide helpful safety and e cient operation information.
Caution! Caution! Installation Guide Installation Guide MANUFACTURING MANUFACTURING Install the unit on a hard and level surface The unit should be positioned at least 7” To prevent electrical shock and damage to Do not use the or the unit could produce undesired noises. away from the wall for proper ventiliation.
Page 4
Maintenance Guide Maintenance Guide How to Reverse Door - EMGR24 How to Reverse Door - EMGR24 MANUFACTURING MANUFACTURING 1.The front top signboard and front bottom grill must be removed to access the door hinge mounting screws. Shelf Cleaning Door Gasket Cleaning Remove the front top signboard by removing the 3 screws which attach it on the top and the 2 screws which attach on the bottom.
Shelves Trouble Shooting Trouble Shooting Shelves MANUFACTURING MANUFACTURING Shelves BEFORE YOU CALL Please check the following before requesting service The unit’s shelves are adjustable so that Symptom Possible Solutions the refrigerated compartment can be configured to suite your needs. Shelf Clip Condensing unit a.
CONDENSER COIL MAINTENANCE EVEREST warrants to the original purchaser of every new EVEREST unit, the cabinet and all parts thereof, to be free from defects in material or workmanship, under normal and proper use and maintenance service as specified by EVEREST and Failure to maintain a clean condenser coil will eventually result in compressor failure and product loss.
Need help?
Do you have a question about the EMGR24 and is the answer not in the manual?
Questions and answers