Table of Contents
Advertisement
2.5 CABINETIRACK INSTALLATION
The mounting bracket (see Figure 2-11) shipped with the D2246 secures the disk drive
when it is installed in a cabinet or rack.
Figure 2-11 Mounting Bracket
The drive can be installed in either a horizontal or vertical position as shown in Figure
2-12. Figure 2-12 also shows the required ventilation for each mounting position. An air
flow of 1.1 cubic yards per minute (1.1 yd
3
/min) is required on a O.4-inch surface.
NOTE
Be certain that the segment 7 of the installation
switch assembly is set according to the mounting
position (see Section 2.4.1).
HORIZONTAL INSTALLATION
Figure 2-12 Horizontal and Vertical Installation
When installing the disk drive, first verify that the mounting holes in the rack or cabinet
align with the holes in the mounting bracket. Refer to Appendix B for information on
unit dimensions.
2-16
Advertisement
Table of Contents
