Combustion Chamber Removal - IDEAL Concord ESi 140 Installation And Servicing Manual

9 GAS TRAIN UNPACKING
2
- Remove the cover and the 4 sides of the gas train package.
- take out the accessories box (1) the front support (2) and the
lower panel (3).

10 COMBUSTION CHAMBER REMOVAL

Before mounting the sections on the base frame:
- remove the burner drawer (3) unscrewing the 4 M8 hex.
flanged nuts (4) on either side of the burner,
Concord ESi -
Installation and Servicing
INSTALLATION
5
- Put the brush (4) away.
- Remove the 2 blocks (5) on the front side.
- Remove the flow and return pipes (6).
#
ON5261
- remove the tray (5) located under the burner drawer,
- remove the combustion chamber (6) fastened by the M8 x 16
screws (7) and serrated washers located in the front and
rear of the combustion chamber.
3
5
1
CON9072
$
"
4
"
!
13