How To Apply The Arm Cuff - ReliOn HEM-412CREL Instruction Manual

HOW TO APPLY THE ARM CUFF

1. If the cuff is assembled correctly, the
sewn hook material will be on the
outside of the cuff loop and the
metal D-ring will not touch your skin.
2. Pass the end of the cuff furthest
from the tubing through the metal
D-ring to form a loop. The smooth
cloth should be on the inside of
the cuff loop.
3. Put your left arm through the cuff
loop. The bottom of the cuff should
be approximately 1/2 inch above
the elbow. The cuff tab on the cuff
should lie over the brachial artery
on the inside of the arm. Tube
should run down center of arm even
with middle finger.
Smooth Cloth
1/2 inch (12.7 mm)
14
Pile Material
Sewn Hook
Material
D-Ring
Cuff tab