Download Print this page

Asus Z01GD User Manual

Hide thumbs


Quick Links

User Guide



  Summary of Contents for Asus Z01GD

  • Page 1 User Guide 15060-96200100 E13400...
  • Page 2: Front Features

    Second Edition / August 2017 ASUS Phone (Mobile Phone) Model: ASUS_Z01GD (ZS551KL) Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit
  • Page 3: Side Features

    Side features Nano SIM x2/ micro SD card slot Eject Volume hole Power Speaker Audio jack USB Type-C port...
  • Page 4: Rear Features

    Rear features Flash Rear camera Laser ZOOM focus NFC detection area NOTES: • The Nano SIM card slots support GSM, WCDMA, FDD-LTE, and TDD-LTE network bands. • The microSD card slot supports microSD and microSDXC card formats.
  • Page 5: Charging Your Asus Phone

    Charging your ASUS Phone To charge your ASUS Phone: 1. Connect the USB connector into the power adapter’s USB port. Connect the other end of the USB cable to your ASUS Phone. 3. Plug the power adapter into a wall socket. IMPORTANT! • When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible. • When charging your ASUS Phone through your computer, ensure that you plug the USB cable to your computer’s USB port.
  • Page 6 Installing a Nano SIM/ microSD card To install a Nano SIM/ microSD card: Push the bundled eject pin into the hole on the card slot to eject the tray out. 2. Insert the Nano SIM or microSD card into the appropriate slot. IMPORTANT! • You can only use the nano SIM card or the microSD card at a time. •...
  • Page 7: Using Nfc

    CAUTION! • Do not use sharp tools or solvent on your device to avoid scratches on it. • Use only a standard Nano SIM card on your ASUS Phone. A trimmed SIM card may not properly fit into and may not be detected by your ASUS Phone. Using NFC You can use NFC in the following three scenarios: Reader mode: Your phone reads information from a contactless card, NFC tag, or other NFC devices. Place the NFC area of your phone on the contactless card, NFC tag, or NFC device.
  • Page 8 Card Emulation mode: Your phone can be used like a contactless card. Place the NFC area of your phone on the NFC area of the NFC reader. Peer-to-Peer mode: Transfers photos, contacts, or other data between your phone and an NFC- enabled smartphone. Bring the NFC areas of both smartphones together, without any space between them.
  • Page 9: Federal Communications Commission Statement

    Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential...
  • Page 10: Rf Exposure Information (Sar)

    antenna or transmitter. The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products that are marketed in US must be fixed to US-operated channels only. RF Exposure Information (SAR) This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least 15 mm away from your body to ensure exposure levels remain at or below the as-tested...
  • Page 11: Hearing Aid Compatibility (Hac) Regulations For Mobile Phones

    as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of after searching on FCC ID: MSQZ01GD. Hearing Aid Compatibility (HAC) regulations for Mobile phones In 2003, the FCC adopted rules to make digital wireless telephones compatible with hearing aids and cochlear implants. Although analog wireless phones do not usually cause interference with hearing aids or cochlear implants, digital wireless phones sometimes do because of electromagnetic energy emitted by the phone’s antenna, backlight, or other components. Your phone is compliant with FCC HAC regulations (ANSI C63.19- 2011). While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise and phones also vary in the amount of interference they generate. The...
  • Page 12: Industry Canada Statement

    not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.
  • Page 13 Cet appareil ne doit pas créer d’interférences, Cet appareil doit tolérer tout type d’interférences, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. CAN ICES-3(B)/NMB-3(B) This device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement à une utilisation en intérieur afin de réduire les risques d’interférence préjudiciables aux systèmes de...
  • Page 14 EU Radio Equipment Directive Compliance Simplified EU Declaration of Conformity Hereby, ASUSTek Computer Inc. declares that the radio equipment ASUS_Z01GD is in compliance with Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www. (Search for ZS551KL) RF Output Table Items Maximum Radio-Frequency Output Power Table Bluetooth BR/EDR (2402~2480 MHz) 11.1 dBm Bluetooth Bluetooth 4.0-LE (2402~2480 MHz) 0.5 dBm...
  • Page 15 RF Output Table (continued) Items Maximum Radio-Frequency Output Power Table WCDMA Band I (1920~1980 ; 22.92 dBm 2110~2170 MHz) WCDMA Band III (1710~1785 ; 22.87 dBm WCDMA 1805~1880 MHz) WCDMA Band VIII (880~915 ; 23.07 dBm 925~960 MHz) LTE Band I (1920~1980; 2110~2170 23.55 dBm MHz) LTE Band III (1710~1785; 23.48 dBm 1805~1880 MHz) LTE Band VII (2500~2570; 22.78 dBm 2620~2690 MHz) LTE Band VIII (880~915; 925~960 23.41 dBm MHz) LTE Band XX (832~862 ; 791~821 23.32 dBm MHz) LTE Band XXVIII (703~748 ;...
  • Page 16: Using Gps (Global Positioning System) On Your Asus Phone

    Body: 0.740 W/Kg When carrying this device or using it while worn on the body, either use an approved accessory such as a holster or otherwise maintain a distance of 0.5 cm from the body to ensure compliance with RF exposure requirements. CE Marking Using GPS (Global Positioning System) on your ASUS Phone To use the GPS positioning feature on your ASUS Phone: • Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. • For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data.
  • Page 17: Prevention Of Hearing Loss

    Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods. For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332- 1:2013 and/or EN50332-2:2013 standard required by French Article L.5232-1. Laser safety information CLASS 1 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007...
  • Page 18: Safety Information

    Safety information CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ASUS Phone care • Use your ASUS Phone in an environment with ambient temperatures between 0 °C (32 °F) and 35 °C (95 °F). The battery WARNING: Disassembling the battery by yourself will void its warranty and may cause serious harm. Your ASUS Phone is equipped with a high performance non-detachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life.
  • Page 19 • Do not touch the battery terminals. • To avoid fire or burns, do not disassemble, bend, crush, or puncture the battery. NOTES: • Risk of explosion if battery is replaced by an incorrect type. • Dispose of used battery according to the instructions. The charger • Use only the charger supplied with your ASUS Phone. • Never pull the charger cord to disconnect it from the power socket. Pull the charger itself. Caution Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter. • Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between 0 °C (32°F) and 35 °C (95 °F).
  • Page 20: Operator Access With A Tool

    * The other four sides are not in close proximity to the human body at the general use as described above. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to...
  • Page 21: Proper Disposal

    Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste.
  • Page 22 ASUS Address: 4F, 150 Li-Te Rd., Peitou, Taipei, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.

This manual is also suitable for: