Download Print this page

Asus ZenFone 3 Deluxe User Manual

Hide thumbs


Quick Links

User Guide



  Summary of Contents for Asus ZenFone 3 Deluxe

  • Page 1 User Guide E11572...
  • Page 2: Front Features

    Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit Front features Front camera P-sensor LED indicator...
  • Page 3: Side Features

    Side features Audio jack Microphone Volume key Micro SIM, nano SIM/ microSD combo card slot Power key Microphone USB Type-C port Speaker NOTES: • The micro SIM card slot supports GSM/ GPRS/EDGE, WCDMA/HSPA+/DC-HSPA+, TD-SCDMA, CDMA2000, FDD-LTE, and TD- LTE DSDS network bands. • The microSD card slot supports microSD and microSDHC card formats.
  • Page 4: Rear Features

    Rear features Camera flash Rear camera IR sensor Fingerprint sensor Rear cover...
  • Page 5: Charging Your Asus Phone

    Charging your ASUS Phone To charge your ASUS Phone: 1. Connect the USB connector into the power adapter’s USB port. 2. Connect the other end of the USB Type-C cable to your ASUS Phone. 3. Plug the power adapter into a wall socket. IMPORTANT! • When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible. • When charging your ASUS Phone through your computer, ensure that you plug the USB Type-C cable to your computer’s USB 2.0 / USB 3.0 port. • Avoid charging your ASUS Phone in an environment with ambient temperature of above C (95 NOTES: • Use only the power adapter that came with your device. Using a different power adapter may damage your device. •...
  • Page 6: Microsd Card

    Installing a micro SIM/ nano SIM/ microSD card To install a micro SIM/ nano SIM/ microSD card: 1. Push a pin into the hole on the micro SIM/ nano SIM/ microSD card slot to eject the tray out. 2. Insert the micro SIM card into the micro SIM card slot. 3A. Insert the microSD card into the nano SIM/microSD combo card slot.
  • Page 7 4. Push the tray to close it. CAUTION! • Do not use sharp tools or solvent on your device to avoid scratches on it. • Use only a standard micro SIM card on your ASUS Phone. A nano to micro SIM adapter or a trimmed SIM card may not properly fit into and may not be detected by your ASUS Phone. DO NOT install an empty nano to micro • SIM adapter into the micro SIM card slot to avoid irreversible damage.
  • Page 8: Federal Communications Commission Statement

    Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may...
  • Page 9: Hearing Aid Compatibility Information (Hac)

    The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Hearing Aid Compatibility Information (HAC) Your phone is compliant with the FCC Hearing Aid Compatibility requirements.
  • Page 10 degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.
  • Page 11 (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits when installed in specific host products operated in portable exposure conditions. Canada’s REL (Radio Equipment List) can be found at the following web address: app/sitt/reltel/srch/ Additional Canadian information on RF exposure also can be found at the following web address:...
  • Page 12 do?lang=eng Pour des informations supplémentaires concernant l’exposition aux RF au Canada rendez-vous sur: html Caution the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;...
  • Page 13: Rf Exposure Information (Sar)

    located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été...
  • Page 14: Ce Rf Exposure Compliance

    has not been tested or certified, and use such accessories should be avoided. The highest FCC SAR values for the device are as follows: • 0.97 W/Kg (Head) • 1.19 W/Kg (Body-worn) The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
  • Page 15: Using Gps (Global Positioning System) On Your Asus Phone W/Kg (Head) • W/Kg (Body) This device is restricted for indoor use only when operating under 5150 MHz to 5350 MHz of frequency range. For 5GHz WLAN: This equipment may be operated in: Using GPS (Global Positioning System) on your ASUS Phone To use the GPS positioning feature on your ASUS Phone: • Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. • For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data.
  • Page 16: Prevention Of Hearing Loss

    Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods. For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332- 1:2013 and/or EN50332-2:2013 standard required by French Article L.5232-1. Laser safety information CLASS 1 LASER PRODUCT Safety information ASUS Phone care • Use your ASUS Phone in an environment with ambient temperatures between 0 °C (32 °F) and 35 °C (95 °F). The battery Your ASUS Phone is equipped with a high performance non-detachable Li-Ion battery. Observe the maintenance guidelines for a longer battery life. • Do not remove the non-detachable Li-Ion...
  • Page 17 • Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from jewelry or metal objects. • Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment. • Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point. • Do not touch the battery terminals. NOTES: • Risk of explosion if battery is replaced by an incorrect type. • Dispose of used battery according to the instructions. The charger • Use only the charger supplied with your ASUS Phone. • Never pull the charger cord to disconnect it from the power socket. Pull the charger itself. Caution Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter.
  • Page 18: Operator Access With A Tool

    Operator access with a tool If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http:// for detailed recycling information in different regions. Regional notice for Singapore This ASUS Phone complies with IDA Standards.
  • Page 19: Proper Disposal

    Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
  • Page 20 ASUS Address: 4F, 150 Li-Te Road, Peitou, Taipei, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.

This manual is also suitable for: