Connecting Ac Power - HP Elite Slice for Meeting Rooms G2 Hardware Reference Manual

NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being
mishandled or stolen.

Connecting AC power

The Elite Slice G2 employs the HP Cable and Port Cover to supply power to the elements of the conferencing
solution.
1. Connect the Cable and Port Cover to the Elite Slice G2:
a. Pull the port cover down (1) to expose the cable connectors.
b. Pull the first and last connectors out (2) to each side.
c. Beginning with the HDMI connector and finishing with the NIC connector, plug all middle connectors
into the rear ports (3) on the Elite Slice G2.
d. Connect side cables (4).
e. Push the port cover back over the cable connectors (5) to protect and secure the connectors.
2. Connect remaining equipment, such as a CoRC or a display, to the Cable and Port Cover.
3. Connect the AC power cord to the power adapter (1) and the other end to an AC outlet (2).
12 Chapter 2 Setup