Removing And Replacing The Access Panel; Removing The Access Panel - HP Elite Slice for Meeting Rooms G2 Hardware Reference Manual

Removing and replacing the access panel

Removing the access panel

The Elite Slice G2 access panel must be removed to access the solid state drive (SSD) and system memory
modules.
1. Remove the Elite Slice G2 from any additional modules.
For instructions, see
2. Place the computer upside down on a flat surface covered with a soft cloth to protect the computer from
scratches or other damage.
3. Loosen the four captive screws securing the access panel, and lift the panel off the computer.
24 Chapter 3 Hardware upgrades
Removing modules on page 10.