2
Setup
Connecting or removing modules
Additional modules may be connected to the Elite Slice G2. Modules should be attached to the base module in
the following order, from top to bottom:
Video Ingest Module (required for the Microsoft SRS only)
●
Wireless Display Module (optional)
●
ODD Module (optional)
●
VESA Plate (optional)
●
Connecting modules
Connecting modules
CAUTION:
Before connecting modules, turn off the Elite Slice G2 and disconnect it from any AC power
source.
Modules cannot be "hot-plugged" or "hot-swapped."
1.
Remove/disengage the security cable, if one is attached.
2.
Remove all removable media, such as USB flash drives.
3.
Turn off the Elite Slice G2 properly through the operating system, and then turn off any external devices.
4.
Disconnect the AC power cord from the Elite Slice G2 and disconnect any external devices.
5.
If the VESA Plate is connected, slide the quick release latch to the unlocked position and remove the
VESA Plate.
Connecting or removing modules
7