HP iPAQ rx3000 Series User Manual page 2

Do not connect the HP desktop cradle or USB
synchronization cable to your PC until the Setup
Wizard on the Companion CD instructs you to do so.
1
Install the battery
Remove battery cover Insert battery
NOTE: The built-in HP Photosmart camera is available only in select HP iPAQ models.
2
Charge the HP iPAQ
Connect the AC adapter to the
HP iPAQ to charge it.
NOTE: It takes about 4 hours to fully
charge the unit.
NOTE: Plugging in the AC adapter turns on the
HP iPAQ. If the unit does not turn on, lightly
press the Reset button on the bottom of the unit.
3
Power on
Press the Power Button to turn on the unit.
4
Device setup
When the HP iPAQ screen displays, tap the screen, then follow on-screen
instructions until setup is complete.
364355-002 Gable lite GSG.p65 2
5
View On-screen Device Demo
The demo shows the features of your new HP iPAQ. It only runs once, but
you can replay it from the Programs folder. Click the
screen to skip the demo.
6
Insert Companion CD into your computer
Insert the Companion CD into your computer and click Start Here.
Replace battery cover
Follow the on-screen instructions. The Setup Wizard installs:
•
Microsoft Outlook
•
ActiveSync 3.7 (or greater)
•
Various other software applications
If you want to skip the introduction demo on your Companion CD, click
Skip Introduction.
7
Connect the HP iPAQ to your computer when
instructed by the Setup Wizard on the Companion CD
a) rx3700 series:
port on your computer. Insert the HP iPAQ into the HP desktop cradle, and
then connect the AC adapter to the cradle.
b) rx3100 and rx3400 series:
sync cable to your computer and the other end to the HP iPAQ. Connect the
AC adapter to the USB sync cable to continue charging it.
at the bottom of the
Connect the end of the USB connector to the USB
rx3700 series
Connect one end of the USB
rx3100 and rx3400 series
7/27/2004, 6:05 PM
8 Establish a partnership
Follow the ActiveSync instructions on your computer to establish a connection
between your HP iPAQ and computer.
Use ActiveSync to synchronize your calendar, tasks, contacts, e-mail messages,
and Web favorites between the HP iPAQ and your computer.
To view Help Topics, open ActiveSync and click Help.
Launch page
When you turn on your HP iPAQ for the first time each day (or after 4 hours of inactivity),
you see the launch page. You also can display it by tapping
Tap to view Tap to view Connections
Programs
Tap to change volume or mute all sounds
menu
Tap to launch HP
Photosmart Camera*
Tap to open iPAQ Mobile Media
Tap to launch HP Image Zone
Tap to open Nevo
Universal Remote
Tap to view and set Wi-Fi and
Bluetooth settings
Tap to create
a new item
* Note: The built-in HP Photosmart camera is available only in select HP iPAQ models. To
upgrade your model, please refer to the Accessories Brochure for information on the
HP Photosmart Mobile Camera.
and then Today.