Device Identity - Anybus CompactCom 40 Network Manual

Basic Operation
4.3

Device Identity

By default, the Anybus CompactCom module appears as a generic HMS Industrial Networks
AB device with the following network identity:
Vendor Name
Model Name
Ident Number
It is possible to customize the network identity information so that the Anybus module appears
as a vendor specific implementation rather than a generic HMS Industrial Networks AB product.
The PROFIBUS I&M-functionality (Identification & Maintenance) provides a standard way of
gathering information about an I/O device. The I&M information is accessed by the master by
means of the Call State Machine using DP-V1 read/write services.
By default, Anybus module supports I&M records 0... 4 for slot #0 (which is the device itself).
Optionally, the host application can implement the commands Get_IM_Record and Set_IM_Re-
cord'-commands
See also...
• PROFIBUS Profile Guidelines Part 1: Identification & Maintenance Functions
• Network Configuration Object (04h), p. 30
• PROFIBUS DP-V1 Object (FDh), p. 36
– Attribute #1, PNO Ident Number
– Command details for Get_IM_Record
– Command details for Set_IM_Record
• Device Identification, p. 44
• Identification & Maintenance Related Keywords, p. 54
®
Anybus CompactCom ™ 40 PROFIBUS DP-V0/DP-V1 Network Guide
"HMS Industrial Networks"
"Anybus CompactCom 40 DP-V1"
1815h
(PROFIBUS DP-V1 Object (FDh), p. 36) to support all I&M records for all slots.
HMSI-27-210-EN 2.3
12 (72)