Electrolux B890905 User Manual page 24

24
Care and cleaning
2. Pull the aluminium plate (A) out of the
holder (C).
3. Hold tight the inner panel (D) with one
hand in position and pull out the holder
(C) with the other.
4. Hold the door glass with one hand and
remove the first glass panel (D) with the
other hand. Do the same with the second
glass panel (E).
Clean the glass panels with water and soap. Dry the glass panels carefully.
Installing the door and the glass panels
After you clean the door, install the glass panels in the opposite sequence. Make sure that
you put the middle panel of glass in the correct seats.
The glass panel "E" has a dot in one of the corners. When you install this panel, make sure
that the dot is in the top left corner of the glass panel.
The glass panel "D" has a decorative frame. When you install this panel, make sure that the
screen-printing is on the outer side. Make sure that the surface of the glass panel frame is
not rough when you touch it.
A
C
C
D
D