Table of Contents
Advertisement
The hob will turn off and return to Standby mode.
"H" or "h" symbols that appear on the
ooking zone display after the hob is
,...._."urned off indicates that the cooking zone
is still hot. Do not touch cooking zones.
Residual heat indicator
"H"
symbol that appears on the cooking zone display
indicates that the hob is still hot and rnay be used to
keep a small amount of food warm. This symbol will
soon turn to
"h"
symbol rneanin less hot.
hen power is cut off, residual heat indicator
ill not light up and does not warn the user
against hot cooking zones.
Touch
key to turn on the hob.
Touch the selection key of the cooking zone you
want to turn on.
"0" appears on the cooking zone display and the light
of the relevant cooking zone illuminates.
If no operation is performed within 20
econds, the hob will automatically return
o Standby mode.
Setting the temperature level
By touching the adjustment area or by sliding your
finger across the area, adjust the temperature level
between "0" and "19".
Turning off the cooking zones:
A cooking zone can be turned off in 3 different ways:
1.
By dropping the temperature level to "0"
You can turn the cooking zone off by dropping
the temperature level to "0".
2.
By using the turning off through the timer
option for the desired cooking zone
When the time is over, the timer will turn off the
cooking zone assigned to it. "0" or "00" will
appear on all displays. The
"~)·
symbol on the
hob display will disappear.
When the time is over, an audible alarm will
sound. Touch any key on the control panel to
silence the audible alarm.
3.
By touching the relevant cooking zone symbol
for 3 seconds.
Touch the symbol of the cooking zone that you
want to turn off for about 3 seconds.
Turning on the wide surface cooking zone
1. Touch
"CD"
key to turn on the hob.
2. Touch Wide Surface Cooking Zone Selection key
»
0
appears on the left rear cooking zone display and
the
of the wide surface cooki
zone flashes.
3.
By touching the adjustment area or by sliding
your finger across the area, adjust the
temperature level between 0 and 19.
»Cooking zone starts to run. If another cooking zone
is selected or no operation is performed for 1 0
seconds, the light of the wide surface cooking zone
illuminates continuously.
Turning on the wide surface cooking zone while
one or both of the left cooking zones are running
While one or both of the left cooking zones are running,
you can combine both cooking zones by activating the
wide surface cooking zone. Thus, you can utilize a
wider
i
zone ·
with the same values.
1. Select one of the left cooking zones while one or
both of the left cooking zones are running.
2. Touch Wide Surface Cooking Zone Selection key
»Temperature value of the previously selected
cooking zone appears on the left rear cooking zone
display and the light of the wide surface cooking zone
flashes.
» Combined cooking zones continue operating with the
temperature and the timer (if available) value of the left
cooking zone you have selected. Value of the left
cooking zone which was not selected before
combini
the
i zones is canceled.
I you touch any of the left cooking zone
I
keys while the wide surface cooking
is active, cooking zones are separated
turned off.
17/EN
Advertisement
Table of Contents
