Technical Specifications - DAVIS DriveRight 130AL User Manual

T S
ECHNICAL PECIFICATIONS
Displays current speed in MPH or km/h.
Records maximum speed for each day.
Records # of minutes speed exceeded set limit for each day.
Speed
Sounds audible alarm when speed exceeds specified limit.
Displays visual alarm message when speed exceeds specified limit.
Accuracy ±1%.
Displays current acceleration in g's (an acceleration of 22 MPH/sec. or 35 km/h/sec.).
Records number of times acceleration exceeded specified limit each day.
Records number of times deceleration exceeded specified limit each day.
Acceleration
and
Sounds audible alarm when acceleration or deceleration exceeds specified limit.
Deceleration
Displays visual alarm message when acceleration or deceleration exceeds specified
limits.
Accuracy ±5%.
Displays total distance travelled during current day in miles or kilometers.
Distance
Records total distance travelled during each day in miles or kilometers.
Accuracy ±1%.
Displays current date.
Displays current time in 12- or 24-hour format.
Records first time vehicle moved during each day.
Time & Date
Records last time vehicle moved during each day.
Records time and date of maximum speed.
Accuracy ±2 seconds/day.
Rugged reed switch sensor with magnet for mounting on vehicle driveshaft (rear
Sensor Type
wheel drive) or CV joint (front wheel drive).
Lamp
Illuminated display.
Primary
Your vehicle's 12-volt battery.
Power
3-volt CR123 lithium battery (included) allows display unit to be removed from car.
Secondary
Battery operating time is approximately 260 hours (four months non-operating) when
Power
it is disconnected from vehicle.
Owner-specified 4-digit password protects settings and data.
Security
Tamper indicator message appears if unit is disconnected.
Tamper screen shows time and date unit was disconnected.
Temperature
Operating range -4˚ F to 185˚ F (-20˚C to 85˚C).
5.25" x 2.25" x 0.86" (132 mm x 57 mm x 22 mm).
Size
LCD display size: 3.20" x 1.30" (81 mm x 33 mm).
Visor clip for mounting on visor or door pockets.
Display
Double-sided tape for mounting on dashboard and other surfaces.
Mounting
Velcro with pressure-sensitive adhesive for mounting on dashboard and other surfaces.
Options
Mounting bracket with right angle adapter for special mounting needs.
A
C C E S S O R I E S
For IBM compatible computers. Prints, graphs, and tracks data downloaded from
DriveRight
130AL
DriveRight 130AL. Comes with hardware and software necessary to install on your
Software Kit
computer.
Second Car Includes sensor and installation hardware. Allows Davis DriveRight 130AL display unit
Kit
to be used with an additional vehicle.
Page 29