Download Print this page

Code Entry Screen - DAVIS DriveRight 130AL User Manual

Table of Contents

Code Entry Screen

The DriveRight 130AL uses a four-digit code to protect logged data and limit

settings from unauthorized tampering. Until the correct code is entered from

this screen, you may not advance to or use any further settings screens. If some-

one enters an incorrect code, the tamper indicator appears. For more informa-

tion on tamper detection, see "Miscellaneous Information" on page 24.

If you do not wish to use a code in operating the DriveRight 130AL, simply

NOTE:

set the code to "0000"(the default code). When the code entry screen appears,

simply press

code also disables the tamper feature.

To move past the code entry screen, enter your code as described below.

1. From the code entry screen, use

code.

2. When the correct code is entered, press

If the entered code is correct, the clear all log data screen appears. If the

entered code is not correct, the word NO appears on the display. You may

attempt to enter the correct code ﬁve times before the unit returns you to the

current readings screen and activates the tamper indicator.

Page 18

to enter "0000"as the correct code. Using "0000" as the

MODE

Invalid Code Indicator

TAMPER

Tamper Indicator

Code Setting

CODE

SETTINGS

"+"

and

"-"

to enter the correct

MODE

CODE

SETTINGS

Table of Contents