Table Of Contents; Specifications - Midland ML801 Instruction Manual

CONTENTS
Specifications.................................................................................................................................................02
Introduction.................................................................................................................................................. 03
What's Included............................................................................................................................................ 04
Emergency/Telecommand Channels......................................................................................................... 04
Features.......................................................................................................................................................... 05
General Operation........................................................................................................................................ 06
Appendix: Frequency/CTCSS/DCS List.................................................................................................... 14
Warranty.........................................................................................................................................................16

SPECIFICATIONS

Output Power:
CB Channels - RX/TX:
CB Frequency Range:
Channel Width:
Power Source (nominal):
Max Absorption Current in TX:
Microphone:
Base Speaker Power:
Digital Coded Squelch (DCS):
Interference Eliminator CTCSS:
Duplex Capability:
Channel Memory Scan:
LCD Display:
Backlit LCD & Keypad:
Flip LCD:
External Speaker Jack:
TX/RX Indicator:
Scanning Receive Functions:
Key Lock:
Key Beep On/Off:
Auto Squelch:
Dimensions (excl Bracket):
Typical Range:
Max Operating Temperature:
5 Watts
80
476.425 ~ 477.4125MHz
12.5kHz (narrowband)
13.8V
1.3A
MK801 w RJ45 Connector
2W Max
104
50
Yes
Yes
Segment
Light Blue (adjustable)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
103W x 24H x 85D mm
18km Line of Sight
50° (Temperature test executed according to
the current law that allows a value up to 55°)
2