Wireless AC1200 Repeater
E12399 / First Edition / March 2017
Placing your RP-AC55
Place your RP-AC55 near your
Download the app
Connect via WPS
Press the WPS button on your
Check the LEDs and see the
around 2 meters
Press the WPS
button on your
more than two (2)
seconds until the
power LED starts
NOTE: Wait until the existing network LED blinks
for about two (2) minutes, then turns solid blue,
indicating the WPS process is completed.
On: RP-AC55 is power on.
Off: RP-AC55 is power off.
On: Connected to the router/AP.
Off: Not connected to the
Need to move RP-AC55 closer
to the router/AP.
MOVE AWAY SLIGHTLY
Need to move RP-AC55 slightly
away from the router/AP.
Plug your RP-AC55 to a
Turn on the power switch.
Use the app
Tap SET UP EXTENDER.
Open your phone Wi-Fi, and connect
to your RP-AC55's SSID.
Your RP-AC55's wireless network name (SSID) changes to your existing Wi-Fi network name,
ending with _RPT or _RPT5G and shares your router/AP's Wireless Password.
Switch this button on/off to turn
Press this button to quickly
connect to the router/AP via the
Use a pin
to push this
button to reset
its factory de-
Wait until the power LED turns blue,
indicating that your RP-AC55 is ready to
connect to your existing router/AP.
Follow the Quick Extender Setup instructions.
Assign a unique network name (SSID) for your extended
Wait until the setup is completed.