Exhaust Pipe Adapter Installation (Top); Exhaust Pipe Adapter Installation (Back) - Drolet DB04800 Installation Manual

Exhaust Pipe Adapter Installation (Top)

1. Remove the exhaust pipe adapter from
the cooking stove. Drill 3 holes at equal
distance on adaptor with the 3/16 drill
bit included. These holes will be used to
secure the chimney adapter.
3. Install the pipe adapter and secure it with
the three screws included with the adapter.
Align the adapter so that two holes are
aligned toward the front and one hole at the
back.

Exhaust Pipe Adapter Installation (Back)

To install the exhaust at the back of the cooking stove, follow the steps below :
1. Remove the rear exhaust vent cover by loosening the screw with a Phillips screwdriver.
2. Remove the sealing gasket under the cover.
3. Attach the cover and gasket to the exhaust vent on the top and secure with the screw.
4. Follow the top installation steps above to install the collar and chimney adapter.
Page 16
2. Secure with two screws provided with the
cooking stove to the existing exhaust outlet.
Installation manual - Outback Chef Wood Burning Cookstove