4-7-2. How to Upgade SW and Micom
Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will
turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the
upgrades are complete (the new version will have a higher number than the older version). When software is upgraded,
video and audio settings you have When software is upgraded, video and audio settings you have you write down your
settings so that you can easily reset them after the upgrade.
Main SW upgrade
1.
Store the sw program named "T-MST5IBRC" in USB memory stick.
Connect the USB.
-
Connect TV and online line.
-
2.
Click the
MENU
key in remote controler.
3.
Select
Support
menu.
Locate the menu cursor
-
4.
Click the
ENTER
key.
You can upgrade
By USB
-
5.
Click the
ENTER
key.
Wait for upgrade complete and check the SW version.
-
Software Upgrade
menu.
or Online.
4. Troubleshooting
4-47