No Video_Component - Samsung UN32D5500RF Service Manual

No Video_Component

„
Symptom Audio is normal but no picture is displayed on the screen.
-
Check the Component source
-
Major
Check the chelsea.
-
checkpoints
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.
-
Main Ass'y
Speaker
Check the component source and check the
connection of component cables (Y,Pb,Pr) ?
Dose the promblem still exist self diagnosis ?
Diagnostics


Caution Make sure to disconnect the power before working on the IP board.
14p cable
LVDS cable
T-con
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Yes
Yes
check the Self Diagnosis
(SupportSelf DiagnosisPicture Test)
Yes
Does the CVBS data appear at
R816/R821(COMP_Y)
R817(COMP_PB)/R815(COMP_PR) ?
Yes
Does the digital data appear at
TP-E_TXCLK+, E_TXCLK- ,
O_TXCLK+, O_TXCLK- ?
Yes
Check the LVDS cable ?
Check the T-Con B'd ?
Replace the LCD panel ?
Power Ass'y
1 B5V
3 B5V
5 GND
7 B12VS
9 B12VS
11 B13V
13 B13V
No
No
No
No
No
No
4. Troubleshooting
Main Assy Power Assy
2 SW_PW 1 B5V
4 A5V 3 B5V
6 GND 5 GND
8 GND 7 B12VS
10 SW_INV 9 B12VS
12 NC 11 B13V
14 DMM 13 B13V
Check a set in the 'Stand-by mode'.
Input the component source properly.
Check external devices and
connections.
Check CN504
Change the Main Assy.
Check IC1001 (X5)
Change the Main Assy.
Please, Contact Tech support.
2 SW_PW
4 A5V
6 GND
8 GND
10 SW_INV
12 NC
14 DMM
4-19