How To Upgade Software And Micom - Samsung UN40J5200AF Service Manual

4. Troubleshooting

4-5-2. How to Upgade Software and Micom

Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV. Please be careful not
to disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on
automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete
(the new version will have a higher number than the older version). When software is upgraded, video and audio
settings you have made will return to their default (factory) settings. We recommend you write down your settings before
beginning firmware update. After update is completed, restore your previous settings.
Main Software Upgrade
„
1. Store the sw program named "T-N14MJUABC" in USB memory stick.
Connect the USB.
-
2. Click the "MENU" key in Remote Controler.
3.
Select "Support" menu.
Locate the menu cursor "Software Update" menu.
4.
Locate the menu cursor "Update now" menu.
5. Click the "ENTER" key.
4-12