Kyocera Torque G02 Settings Manual

Introduction
G02
Setting Guide
Thank you for buying the "TORQUE G02" (simply called the
"product" from here on). In this guide, settings and
precautions for using the product are described.
For explanations of basic functions, refer to "Basic Manual".
Company names and product names referred to in this manual are
trademarks or registered trademarks of respective companies.
The TM, ® marks may be omitted in this manual.
Screen illustrations shown in this manual may look different from the
actual screens. In some cases, minor details or a part of a screen may
be omitted.
May 2015, 1st Edition
Basic Operation
For detailed operations, refer to the "Basic Manual" application that can be used on the product.
F Power button
Power On
F (Long-touch at least 2 seconds)
Displaying the Home Screen from
the Start Screen
Touch "
"START" to display the Home screen.
Swiping (flicking) toward
"CAMERA"/"PHONE" activates camera/
phone.
• If a description for the Home screen
Display the Apps list.
N Recents button
Display the recently-used apps.
H Home button
Display the Home screen or use for canceling sleep mode.
C Back button
Tap to return to the previous screen.
z Direct button
Long-touch to use the function set from the Apps list → [Settings] → [Direct Button].
Display (Touch panel)
Operate directly touching with your finger.
Tap Long-touch
Lightly touch a Keep touching a
screen and then screen.
immediately
release your finger.
■
Character Entry
Enter character by flick input or tapping key repeatedly.
Flick input
Long-touch a key to display input candidates for flick input as right
screen. Flick to the direction of character to enter.
■
Silent Mode Setting
• Long-touch l (Volume DOWN button) on left side of the product to set Silent mode on/off.
• To change the Silent mode type, access the Apps list→ [Settings] → [Sound & notification] → [Silent mode type] → [Vibrate]/[Mute]/
[Drive].
Initial Settings
When you turn on the product for the first time, follow the onscreen instructions to set the language, functions, services, etc.
■
Setting Up a Google Account
Set up Google account to use Google apps such as "Gmail", "Play Store", "Hangouts".
Setting items are as below (besides the items below, register "First" name, "Last" name).
Register your Google account (user ID) and any character string for mail address. You can register a desired name, but a
User name
registered name by another user cannot be set.
Password Register password for the Google account.
Select language,[ ] Set up the Wi-Fi network
*1
to connect as required
Enter a user name →
Enter a password, and
[NEXT] reenter the password for
confirmation → [NEXT]
Checking registration of
username starts.
Select whether to set [SET SCREEN LOCK
payment information → → Follow the
NOW] *1
[NEXT] onscreen instructions
Here, tap "Remind me
later" and go to next step.
*1 If you do not set up, tap "SKIP".
*2 If you already have a Google account, enter the e-mail address.
■
Basic Operation
Describes the basic operations.
■
Initial Settings
Make initial settings when you turn the power on for the first time.
■
au Easy Setting
Sets au ID.
■
E-mail
Make initial settings for @ezweb.ne.jp etc.
■
Making a Call
Adds a contact as a new and makes a call.
■
Receiving a Call
Describes how to receive a call.
■
Importing/Exporting Contacts
Import/export contacts using a microSD™ or other memory card.
■
Saving Battery Power
Describes the setting to save battery consumption using "Eco
Mode".
■
Setting Wi-Fi ®
Describes how to connect Wi-Fi ® network.
■
Viewing/Playing Data
Describes how to view and play still image and video data.
■
How to Transfer Data with the au Settings Menu
You can return or store data from a previously used au phone to
the product using a microSD memory card or auスマートパス
(au Smart Pass) server.
Sold by: KDDI CORPORATION,
OKINAWA CELLULAR TELEPHONE COMPANY
Manufactured by: KYOCERA Corporation
Widget
" and swipe (flick) toward
Notification
display
Indicator
Start icon
• Widgets are displayed in the Start
screen. Swipe (flick) left/right or
press z (Direct button) to
switch between widgets.
appears, read the information and
tap "OK".
Apps list
Flick (swipe) Slide
Touch the screen Slide your finger
and flick up/down/ across the screen
left/right. in a desired
direction to view
hidden content.
《Character entry screen (10-key)》
Back up apps and data [Or create a new
*1 *2
as required account]
Confirm/change name Check the contents,
of country and phone then [I AGREE]
number → [NEXT] →
[VERIFY] *1
Check the contents,
then [NEXT]
au Easy Setting
By setting au ID, you can use various services provided by au such as "au Simple Payment Service" which allows you to purchase
applications from the au スマートパス (au Smart Pass) or Google Play. Main setting items as follows.
au ID *
au ID password
* "au ID" which is already used by another user cannot be set.
• If you skipped completing "au Easy Setting" after purchasing the product, you can set an au ID later. To set, either tap "Settings" → "au
Settings Menu" → "au Easy Setting", or tap the Apps list → "au ID Setting".
Welcome to au screen
→ [Next]
[au ID 設定メニューへ
(To au ID settings
menu)] → [パスワード
を忘れた時のために
(When you forget your
password)]
《Start screen》
Select apps to install
→ [次へ (Next)]
*1 Default value is a four-digit number written at subscription.
*2 Setting beforehand is completed for Lookout for au as soon as you tap "Agree".
*3 When a screen different from that shown here appears, follow the onscreen instructions.
*4 If no data is stored to auスマートパス (au Smart Pass), this screen is not displayed.
E-mail
To use E-mail (@ezweb.ne.jp), subscription to LTE NET is required.
If you did not subscribe it when you purchased the product, contact an au shop or Customer Service Center.
Your E-mail address is determined automatically after initial setting. You can change the E-mail address later.
■
Initial Settings
Character entry mode
switch key
Tap to switch character
type.
Home screen → [E-mail]
■
Changing Your E-mail Address
Home screen → [E-mail] [
Enter your [First name]
and [Last name] →
Check the contents,
[NEXT]
then [承諾する
(I accept)]
■
Backing Up E-mail
You can back up E-mail.
Backed up data is saved on a microSD™ memory card (/storage/sdcard1/private/au/email/BU/) when a microSD™ memory card is
attached. If a microSD™ memory card is not attached, data is saved on the internal storage (/storage/emulated/0/private/au/email/BU/).
Check the contents,
then [NEXT]
Home screen → [E-mail] [
Select a mail type to
back up → [OK]
Register your au phone number or any character string for au ID (user ID).
Register password for using au ID.
[au IDの設定 ・ 保存
[Register "au ID"]
→ [Next]
(Set/save au ID)]
Enter 生年月日 (Date of [Update] → [Next]
birth), 秘密の質問
(Secret question),
答え (Answer)
→ [入力完了 (Done)]
→ [変更 (Change)]
→ [終了 (Done)]
Check the contents, Check the contents,
[Activate]/[Skip [Activate]/[Skip
activation] → [Next] activation] → [Next]
To use au Basic Home, To use the smartphoning
select [Activate]. while walking app, select
[Activate].
Check the contents, Confirm e-mail address
→ [閉じる (Close)]
then [接続する
(Connect)]
] → [E-mail settings]
[Other settings]
→ [接続する (Connect)]
Enter E-mail address →
[OK]
[送信 (Send)]
] → [E-mail settings]
[Backup/Restore]
Mail Settings Other Than E-mail
You can use mail addresses except for E-mail (@ezweb.ne.jp).
Use of other mail addresses requires accounts to be set. When using another mail address for the first
time, set the address as follows.
Apps list → [Gmail] → Follow onscreen instructions
Enter the security Enter a security
→ [OK]
code *1 password
→ [設定 (Settings)]
Check the terms and Check the contents,
conditions (reading [Turn Auto Backup on]/
*3
required), [Agree] [Turn Auto Backup off]
→ [Next] → [Agree] → [Next]
*2
To use the [Data Storage
App] application and
automatically store photos
and address book entries
to the auスマートパス (au
Smart Pass) server, select
[Turn Auto Backup on].
Select type of data to [Finish]
→ [次へ (Next)]
return *4
Check the contents,
[Agree] → [Done]
[Eメールアドレスの変 Enter the security code
更へ (To change E-mail → [送信 (Send)]
address)]
[閉じる (Close)]
[Mail Backup] Select a character code
→ Confirm the notes
to make backup data
→ [OK]
and [OK]