Advertisement
F.
Click Next.
G.
Click Install and wait for the installation of the
required driver to be finished.
H.
Click Finish to exit the wizard. Installation is now
complete.
4
STEP
Click Next.
D.
A.
After installing the software, you may now
E.
If you selected the first option, please select either
proceed to hardware installation by inserting the
one of the options available:
WL592USB to any USB port of your computer.
5
STEP
Connect to a Network
• Connecting to Non-Secured Wireless AP
A.
Click Available Network icon then double click
on the desired Access Point (AP) from the list to
automatically connect.
Hardware Installation
Available Network
Icon
• Connecting to WEP-Secured Wireless AP
A.
Click Available Network icon then double click on
the selected AP from the list with WEP encryption.
• Connecting to WPA2-PSK Secured Wireless AP
A.
Click Available Network icon then double click
on the selected AP from the list with WPA2-PSK
encryption.
B.
The Authentication and Encryption information will
appear. Click the arrow button
to enter the WEP
Key.
B.
The Authentication and Encryption information will
appear. Select WPA2-PSK as the Authentication
Type.
C. Select TKIP or AES encryption on the Encryption
C.
Enter the key in the field as shown. The value
drop down box then click the arrow button
must be the same as the key set in the Access
enter the Passphrase key.
Point. Click the arrow button
to connect.
Enter the key in the field as shown. The value must
D.
be the same as the key set in the Access Point.
Click the arrow button
to connect.
to
Advertisement
